Linux Laptop Ultimate Thread

[Dr.Paneas]

Σε αυτό θα thread θα γράφει ο καθένας την δικιά του "περιπέτεια" με το Linux και το laptop του καθώς και τις λύσεις που βρήκε για να το κάνει να παίξει.

Παρακαλώ μην ρωτάτε ερωτήσεις εδω, αλλά κάντε καινούριο post αν θελετε να ρωτήσετε κάτι για ένα συγκεκριμένο μοντέλο.. Ο λογος είναι ότι θα χαθούν πράγματα που ίσως είναι δύσκολα να βρει ο αλλος ακομα και με Search.

Πανω πάνω να γράφετε το ποσοστό επι τις εκατό που είναι συμβατό το laptop. Πώς ;

Installation: 15%

και μετά για κάθε ένα απο αυτά προσθέστε :

Sound Card: = +5%

BlueTooth: +5%

WebCam: +5%

Network LAN: +15%

Wifi: +15%

Graphics: +20%

Shutdown/Reboot: %5%

Suspend/Hibernation: %5%

Hot Keys: +5%

Modem για Dial Up: +5%

Ας αρχίσω πρώτος λοιπον

[Dr.Paneas]

Notebook: HP Compaq 6720s

Τιμή: 850 Ευρώ

PreInstalled OS: Windows Vista Home Basic 32bit

Linux Distro: Ubuntu 7.10 Gutsy Gibbon

Συμβατότητα: 85%

============================

Συγκεκριμένα δούλεψαν:

Ιnstall: 15%

Sound Card: 5%

BlueTooth: 5%

Network LAN: +15%

Wifi: +15%

Graphics: +20%

Shutdown/Reboot: %5%

============================

HP Link για Drivers: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3442833&prodTypeId=321957&prodSeriesId=3442832&swLang=19&taskId=135&swEnvOID=2094

Λοιπόν πριν βαλουμε το Ubuntu, πρεπει να κανουμε ενα flash το BIOS στην latest εκδοση γιατί θα έχουμε προβήματα τόσο με το Linux τόσο και μετa Vista. Κατεβαζουε λοιπον το προγραμμα που κανει αναβαθμιση το BIOS απο το επισημο website της HP και το τρεχουμε για να βαλουμε την καινουριο εκδοση.

Πριν την εγκατάσταση μπαίνουμε στο BIOS και βάζουμε το Use of Native SATA --> Disable

Κανουμε την εγκατασταση κανονικα με το Live CD χωρις να υπάρχει πρόβλημα. Στην συνέχεια πρέπει να φτιάξουμε 3 πράγματα:

1) Ethernet

2)Wifi

3) VGA

=========================================================================

Network Ethernet

Αν βαλατε την καινουρια εκδοση του BIOS θα πρεπει να παίζει αλλιώς πρεπει να ρυθμισετε τον grub να μην ξεκινηαει το acpi

sudo gedit /boot/grub/menu.lst

Και στην γραμμή του kernel:

πχ

title Ubuntu 7.10, kernel 2.6.22-14-generic

root (hd0,3)

--> kernel /boot/vmlinuz-2.6.22-14-generic root=UUID=a089c41b-e47e-444e-b389-e5a23ed610ee ro quiet splash

initrd /boot/initrd.img-2.6.22-14-generic

quiet

[/quote[

προσθέστε pci=noacpi

Δηλαδη ετσι:

kernel		/boot/vmlinuz-2.6.22-14-generic root=UUID=a089c41b-e47e-444e-b389-e5a23ed610ee ro quiet splash pci=noacpi

Reboot και το δικτυο θα παιζει μια χαρα. Αλλα προσοχη αν εχετε βαλει το καινουριο BIOS (που σαν λεω να το βαλετε γιατι θα μπλεξετε) ΔΕΝ χρειαζεται να το κανετε αυτο. Αν το κανετε αυτο, πιθανόν να μην κάνει restart ή shutdown το laptop!!!

============================================================================

Wireless:

Κατεβαζουμ τον driver απο το website της HP που είναι για τα Windows XP.

Βαζουμ blacklist τον driver

sudo gedit /etc/modprobe.d/blacklist

και γράφουμε στο τέλος του αρχείου:

blacklist bcm43xx

Τώρα κατεβαζω τους drivers για τα XP από ftp://ftp.hp.com/pub/softpaq/sp36501-37000/sp36684.exe

Συνήθως είναι της Broadcom γυρω στα 6.9mb και λεγονται: Broadcom Wireless Lan Driver . Το link αυτο ειναι παλιο και μπορειτε να βρειτε πιο καινουριος drivers αλλα και αυτοι κανουν. Παρόλα αυτα για να ειστε σιγουροι κατεβαστε τους latest.

Μετα κατεβαζω το cabextract

sudo apt-get install cabextract

Μετά κατεβαζω το ndiswrapper

sudo apt-get install ndiswrapper-utils

Παω στο home dir

cd /home/yourusername/

Κανω extract τους drivers για XP με την εντολη:

cabextract -d /home/yourusername/arandomname sp36684

Μπαίνω στον φάκελο που ειναι τα αρχειo:

cd /home/yourusername/arandomname

Τωρα καντε ls και θα πρεπει να δειτε ενα αρχειο bcmwl5.inf

Δίνω λοιπόν:

sudo ndiswrapper -i bcmwl5.inf

Έλεγχος αν ολα πήγαν καλα:

sudo ndiswrapper -l

θα πρέπει να σας λέει κάτι σαν driver installed, device present ή τιποτα.

Τωρα ας φτιαξουμε ενα configuration file

sudo depmod -a

Μετά:

sudo modprobe ndiswrapper

Μετά:

sudo ndiswrapper -m

Ανοίξτε ενα terminal και προσθέστε τα modules του ndiswrapper:

sudo gedit /etc/modules

και στο τέλος του αρχείου γράψτε:

ndiswrapper

Reboot και θα παίζει!

==============================================================================

3D Effects:

Ανοιξτε terminal και φτιαξε ενα φακελο:

sudo mkdir /.config/compiz

Μετά:

sudo gedit /.config/compiz/compiz-manager

και γράψτε μέσα: SKIP_CHECKS=yes

Αποθηκευστε και κλειστε το.

Για να αποφυγετε αυτα , δώστε απευθειας:

sudo mkdir -p ~/.config/compiz/ && echo SKIP_CHECKS=yes >> ~/.config/compiz/compiz-manager

Τώρα πάμε ξανα, terminal και γράψτε:

gstreamer-properties

Click στην Video Tab,

Αλάξτε το Default Output Plugin: σε "X Window System (No Xv)".

Τελος, για να ενεργοποιήσετε επιτελους τα Visual Effects του Compiz-Fusion, δεν έχετε παρά να πάτε

στο System > Preferences > Appearance και στην καρτέλα Visual Effects να επιλεξετε Enable.

TIP: Για να έχετε περισσότερες επιλογες στα εφέ σας, μπορείτε να κατεβασετε τον Compiz Manager .

Αρκεί να δώσετε:

sudo apt-get install compizconfig-settings-manager

Και μετα θα τον βρείτε στο System > Preferences > Advanced Desktop Effects Settings.

Reboot και παίζει.

==============================================================================

Επιπλέον ρυθμίσεις για διάφορα προγράμματα:

Το kismet παίζει. Θα κανω edit μετα να δωσω το kismet.conf:fun:

# Kismet config file

# Most of the "static" configs have been moved to here -- the command line

# config was getting way too crowded and cryptic. We want functionality,

# not continually reading --help!

# Version of Kismet config

version=2007.09.R1

# Name of server (Purely for organizational purposes)

servername=Kismet

# User to setid to (should be your normal user)

suiduser=panos

# Do we try to put networkmanager to sleep? If you use NM, this is probably

# what you want to do, so that it will leave the interfaces alone while

# Kismet is using them. This requires DBus support!

networkmanagersleep=true

# Sources are defined as:

# source=sourcetype,interface,name[,initialchannel]

# Source types and required drivers are listed in the README under the

# CAPTURE SOURCES section.

# The initial channel is optional, if hopping is not enabled it can be used

# to set the channel the interface listens on.

# YOU MUST CHANGE THIS TO BE THE SOURCE YOU WANT TO USE

source=bcm43xx,wlan0,broadcom

# Comma-separated list of sources to enable. This is only needed if you defined

# multiple sources and only want to enable some of them. By default, all defined

# sources are enabled.

# For example:

# enablesources=prismsource,ciscosource

# Automatically destroy VAPs on multi-vap interfaces (like madwifi-ng).

# Madwifi-ng doesn't work in rfmon when non-rfmon VAPs are present, however

# this is a fairly invasive change to the system so it CAN be disabled. Expect

# things not to work in most cases if you do disable it, however.

vapdestroy=true

# Do we channelhop?

channelhop=true

# How many channels per second do we hop? (1-10)

channelvelocity=5

# By setting the dwell time for channel hopping we override the channelvelocity

# setting above and dwell on each channel for the given number of seconds.

#channeldwell=10

# Do we split channels between cards on the same spectrum? This means if

# multiple 802.11b capture sources are defined, they will be offset to cover

# the most possible spectrum at a given time. This also controls splitting

# fine-tuned sourcechannels lines which cover multiple interfaces (see below)

channelsplit=true

# Basic channel hopping control:

# These define the channels the cards hop through for various frequency ranges

# supported by Kismet. More finegrain control is available via the

# "sourcechannels" configuration option.

#

# Don't change the IEEE80211<x> identifiers or channel hopping won't work.

# Users outside the US might want to use this list:

# defaultchannels=IEEE80211b:1,7,13,2,8,3,14,9,4,10,5,11,6,12

defaultchannels=IEEE80211b:1,6,11,2,7,3,8,4,9,5,10

# 802.11g uses the same channels as 802.11b...

defaultchannels=IEEE80211g:1,6,11,2,7,3,8,4,9,5,10

# 802.11a channels are non-overlapping so sequential is fine. You may want to

# adjust the list depending on the channels your card actually supports.

# defaultchannels=IEEE80211a:36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140,149,153,157,161,184,188,192,196,200,204,208,212,216

defaultchannels=IEEE80211a:36,40,44,48,52,56,60,64

# Combo cards like Atheros use both 'a' and 'b/g' channels. Of course, you

# can also explicitly override a given source. You can use the script

# extras/listchan.pl to extract all the channels your card supports.

defaultchannels=IEEE80211ab:1,6,11,2,7,3,8,4,9,5,10,36,40,44,48,52,56,60,64

# Fine-tuning channel hopping control:

# The sourcechannels option can be used to set the channel hopping for

# specific interfaces, and to control what interfaces share a list of

# channels for split hopping. This can also be used to easily lock

# one card on a single channel while hopping with other cards.

# Any card without a sourcechannel definition will use the standard hopping

# list.

# sourcechannels=sourcename[,sourcename]:ch1,ch2,ch3,...chN

# ie, for us channels on the source 'prism2source' (same as normal channel

# hopping behavior):

# sourcechannels=prism2source:1,6,11,2,7,3,8,4,9,5,10

# Given two capture sources, "prism2a" and "prism2b", we want prism2a to stay

# on channel 6 and prism2b to hop normally. By not setting a sourcechannels

# line for prism2b, it will use the standard hopping.

# sourcechannels=prism2a:6

# To assign the same custom hop channel to multiple sources, or to split the

# same custom hop channel over two sources (if splitchannels is true), list

# them all on the same sourcechannels line:

# sourcechannels=prism2a,prism2b,prism2c:1,6,11

# Port to serve GUI data

tcpport=2501

# People allowed to connect, comma seperated IP addresses or network/mask

# blocks. Netmasks can be expressed as dotted quad (/255.255.255.0) or as

# numbers (/24)

allowedhosts=127.0.0.1

# Address to bind to. Should be an address already configured already on

# this host, reverts to INADDR_ANY if specified incorrectly.

bindaddress=127.0.0.1

# Maximum number of concurrent GUI's

maxclients=5

# Do we have a GPS?

gps=true

# Host:port that GPSD is running on. This can be localhost OR remote!

gpshost=localhost:2947

# Do we lock the mode? This overrides coordinates of lock "0", which will

# generate some bad information until you get a GPS lock, but it will

# fix problems with GPS units with broken NMEA that report lock 0

gpsmodelock=false

# Packet filtering options:

# filter_tracker - Packets filtered from the tracker are not processed or

# recorded in any way.

# filter_dump - Packets filtered at the dump level are tracked, displayed,

# and written to the csv/xml/network/etc files, but not

# recorded in the packet dump

# filter_export - Controls what packets influence the exported CSV, network,

# xml, gps, etc files.

# All filtering options take arguments containing the type of address and

# addresses to be filtered. Valid address types are 'ANY', 'BSSID',

# 'SOURCE', and 'DEST'. Filtering can be inverted by the use of '!' before

# the address. For example,

# filter_tracker=ANY(!00:00:DE:AD:BE:EF)

# has the same effect as the previous mac_filter config file option.

# filter_tracker=...

# filter_dump=...

# filter_export=...

# Alerts to be reported and the throttling rates.

# alert=name,throttle/unit,burst/unit

# The throttle/unit describes the number of alerts of this type that are

# sent per time unit. Valid time units are second, minute, hour, and day.

# Burst rates control the number of packets sent at a time

# For example:

# alert=FOO,10/min,5/sec

# Would allow 5 alerts per second, and 10 alerts total per minute.

# A throttle rate of 0 disables throttling of the alert.

# See the README for a list of alert types.

alert=NETSTUMBLER,10/min,1/sec

alert=WELLENREITER,10/min,1/sec

alert=LUCENTTEST,10/min,1/sec

alert=DEAUTHFLOOD,10/min,2/sec

alert=BCASTDISCON,10/min,2/sec

alert=CHANCHANGE,5/min,1/sec

alert=AIRJACKSSID,5/min,1/sec

alert=PROBENOJOIN,10/min,1/sec

alert=DISASSOCTRAFFIC,10/min,1/sec

alert=NULLPROBERESP,10/min,1/sec

alert=BSSTIMESTAMP,10/min,1/sec

alert=MSFBCOMSSID,10/min,1/sec

alert=LONGSSID,10/min,1/sec

alert=MSFDLINKRATE,10/min,1/sec

alert=MSFNETGEARBEACON,10/min,1/sec

alert=DISCONCODEINVALID,10/min,1/sec

alert=DEAUTHCODEINVALID,10/min,1/sec

# Known WEP keys to decrypt, bssid,hexkey. This is only for networks where

# the keys are already known, and it may impact throughput on slower hardware.

# Multiple wepkey lines may be used for multiple BSSIDs.

# wepkey=00:DE:AD:C0:DE:00,FEEDFACEDEADBEEF01020304050607080900

# Is transmission of the keys to the client allowed? This may be a security

# risk for some. If you disable this, you will not be able to query keys from

# a client.

allowkeytransmit=true

# How often (in seconds) do we write all our data files (0 to disable)

writeinterval=300

# How old (and inactive) does a network need to be before we expire it?

# This is really only good for limited ram environments where keeping a

# total log of all networks is problematic. This is in seconds, and should

# be set to a large value like 12 or 24 hours. This is intended for use

# on stationary systems like an IDS

# logexpiry=86400

# Do we limit the number of networks we log? This is for low-ram situations

# when tracking everything could lead to the system falling down. This

# should be combined with a sane logexpiry value to flush out very old

# inactive networks. This is mainly for stationary systems like an IDS.

# limitnets=10000

# Do we track IVs? this can help identify some attacks, but takes a LOT

# of memory to do so on a busy network. If you have the RAM, by all

# means turn it on.

trackivs=false

# Do we use sound?

# Not to be confused with GUI sound parameter, this controls wether or not the

# server itself will play sound. Primarily for headless or automated systems.

sound=false

# Path to sound player

soundplay=/usr/bin/play

# Optional parameters to pass to the player

# soundopts=--volume=.3

# New network found

sound_new=${prefix}/share/kismet/wav/new_network.wav

# Wepped new network

# sound_new_wep=${prefix}/com/kismet/wav/new_wep_network.wav

# Network traffic sound

sound_traffic=${prefix}/share/kismet/wav/traffic.wav

# Network junk traffic found

sound_junktraffic=${prefix}/share/kismet/wav/junk_traffic.wav

# GPS lock aquired sound

# sound_gpslock=${prefix}/share/kismet/wav/foo.wav

# GPS lock lost sound

# sound_gpslost=${prefix}/share/kismet/wav/bar.wav

# Alert sound

sound_alert=${prefix}/share/kismet/wav/alert.wav

# Does the server have speech? (Again, not to be confused with the GUI's speech)

speech=false

# Server's path to Festival

festival=/usr/bin/festival

# Are we using festival lite? If so, set the above "festival" path to also

# point to the "flite" binary

flite=false

# Are we using Darwin speech?

darwinsay=false

# What voice do we use? (Currently only valid on Darwin)

speech_voice=default

# How do we speak? Valid options:

# speech Normal speech

# nato NATO spellings (alpha, bravo, charlie)

# spell Spell the letters out (aye, bee, sea)

speech_type=nato

# speech_encrypted and speech_unencrypted - Speech templates

# Similar to the logtemplate option, this lets you customize the speech output.

# speech_encrypted is used for an encrypted network spoken string

# speech_unencrypted is used for an unencrypted network spoken string

#

# %b is replaced by the BSSID (MAC) of the network

# %s is replaced by the SSID (name) of the network

# %c is replaced by the CHANNEL of the network

# %r is replaced by the MAX RATE of the network

speech_encrypted=New network detected, s.s.i.d. %s, channel %c, network encrypted.

speech_unencrypted=New network detected, s.s.i.d. %s, channel %c, network open.

# Where do we get our manufacturer fingerprints from? Assumed to be in the

# default config directory if an absolute path is not given.

ap_manuf=ap_manuf

client_manuf=client_manuf

# Use metric measurements in the output?

metric=false

# Do we write waypoints for gpsdrive to load? Note: This is NOT related to

# recent versions of GPSDrive's native support of Kismet.

waypoints=false

# GPSDrive waypoint file. This WILL be truncated.

waypointdata=%h/.gpsdrive/way_kismet.txt

# Do we want ESSID or BSSID as the waypoint name ?

waypoint_essid=false

# How many alerts do we backlog for new clients? Only change this if you have

# a -very- low memory system and need those extra bytes, or if you have a high

# memory system and a huge number of alert conditions.

alertbacklog=50

# File types to log, comma seperated

# dump - raw packet dump

# network - plaintext detected networks

# csv - plaintext detected networks in CSV format

# xml - XML formatted network and cisco log

# weak - weak packets (in airsnort format)

# cisco - cisco equipment CDP broadcasts

# gps - gps coordinates

logtypes=dump,network,csv,xml,weak,cisco,gps

# Do we track probe responses and merge probe networks into their owners?

# This isn't always desireable, depending on the type of monitoring you're

# trying to do.

trackprobenets=true

# Do we log "noise" packets that we can't decipher? I tend to not, since

# they don't have anything interesting at all in them.

noiselog=false

# Do we log corrupt packets? Corrupt packets have enough header information

# to see what they are, but someting is wrong with them that prevents us from

# completely dissecting them. Logging these is usually not a bad idea.

corruptlog=true

# Do we log beacon packets or do we filter them out of the dumpfile

beaconlog=true

# Do we log PHY layer packets or do we filter them out of the dumpfile

phylog=true

# Do we mangle packets if we can decrypt them or if they're fuzzy-detected

mangledatalog=true

# Do we do "fuzzy" crypt detection? (byte-based detection instead of 802.11

# frame headers)

# valid option: Comma seperated list of card types to perform fuzzy detection

# on, or 'all'

fuzzycrypt=wtapfile,wlanng,wlanng_legacy,wlanng_avs,hostap,wlanng_wext,ipw2200,ipw2915

# Do we do forgiving fuzzy packet decoding? This lets us handle borked drivers

# which don't indicate they're including FCS, and then do.

fuzzydecode=wtapfile,radiotap_bsd_a,radiotap_bsd_g,radiotap_bsd_bg,radiotap_bsd_b,pcapfile

# Do we use network-classifier fuzzy-crypt detection? This means we expect

# packets that are associated with an encrypted network to be encrypted too,

# and we process them by the same fuzzy compare.

# This essentially replaces the fuzzycrypt per-source option.

netfuzzycrypt=true

# What type of dump do we generate?

# valid option: "wiretap"

dumptype=wiretap

# Do we limit the size of dump logs? Sometimes ethereal can't handle big ones.

# 0 = No limit

# Anything else = Max number of packets to log to a single file before closing

# and opening a new one.

dumplimit=0

# Do we write data packets to a FIFO for an external data-IDS (such as Snort)?

# See the docs before enabling this.

#fifo=/tmp/kismet_dump

# Default log title

logdefault=Kismet

# logtemplate - Filename logging template.

# This is, at first glance, really nasty and ugly, but you'll hardly ever

# have to touch it so don't complain too much.

#

# %n is replaced by the logging instance name

# %d is replaced by the current date as Mon-DD-YYYY

# %D is replaced by the current date as YYYYMMDD

# %t is replaced by the starting log time

# %i is replaced by the increment log in the case of multiple logs

# %l is replaced by the log type (dump, status, crypt, etc)

# %h is replaced by the home directory

# ie, "netlogs/%n-%d-%i.dump" called with a logging name of "Pok" could expand

# to something like "netlogs/Pok-Dec-20-01-1.dump" for the first instance and

# "netlogs/Pok-Dec-20-01-2.%l" for the second logfile generated.

# %h/netlots/%n-%d-%i.dump could expand to

# /home/foo/netlogs/Pok-Dec-20-01-2.dump

#

# Other possibilities: Sorting by directory

# logtemplate=%l/%n-%d-%i

# Would expand to, for example,

# dump/Pok-Dec-20-01-1

# crypt/Pok-Dec-20-01-1

# and so on. The "dump", "crypt", etc, dirs must exist before kismet is run

# in this case.

logtemplate=%n-%d-%i.%l

# Where do we store the pid file of the server?

piddir=/var/run/

# Where state info, etc, is stored. You shouldnt ever need to change this.

# This is a directory.

configdir=%h/.kismet/

# cloaked SSID file. You shouldn't ever need to change this.

ssidmap=ssid_map

# Group map file. You shouldn't ever need to change this.

groupmap=group_map

# IP range map file. You shouldn't ever need to change this.

ipmap=ip_map

[Spyrus]

Bάλε και την κάρτα ήχου ένα ποσοστό, όπως και bluetooth.

Notebook: HP Pavillion dv6187ea

Τιμή: 1200 Ευρώ

PreInstalled OS: Windows XP Home 32bit

Linux Distro: Suse 9.3 Professional

Συμβατότητα: ?%

Installation: 25%

WebCam: -%

Network LAN: -%

Wifi: -%

Graphics: +20%

Shutdown/Reboot: %5%

Suspend/Hibernation: %5%

Hot Keys: +5%

Modem για Dial Up: -%

Χρειάστηκε να βάλω οδηγούς για κάρτα ethernet (Intel e1000 100/1000pro 7.4.x +),

alsa πιο νέους για ήχο (1.0.13+).

Bluetooth ok, wlan δεν έχω παίξει ακόμα αλλά θα βοηθήσει το ποστ και camera δεν έπαιξα ακόμα.

edit: Panea αυτό είναι το emulation του windows driver? Αν και δεν έχω debian θα παίξει στο suse κάτι ανάλογο;

Αν μπορεις βοήθα.

[Reaper]

Apple MacBook (INTEL CORE 2 DUO 2.0GHZ, HDD 80GB, RAM 1024MB)

Tιμή 910 ευρώ

Η 4η ή 5η έκδοση νομίζω με wireless μια βλακεία Broadcom και όχι atheros

Linux Distro: Debian Lenny Testing (kernel 2.6.24 unstable)

Συμβατότητα: 70%

Συγκεκριμένα δούλεψαν:

Install: -->http://wiki.debian.org/MacBook

Network LAN: --> out of the box

Wifi: -->https://help.ubuntu.com/community/WifiDocs/Driver/bcm43xx/Feisty_No-Fluff#head-c9037d4dac23680f0939e488c2291413ce831ef3

Graphics: -->out of the box

Shutdown/Reboot: --> out of the box

Sound: -->http://research.naumachiarius.com/articles/macbook-debian.html

Hot Keys: --> δεν κατάφερα τπτ

Suspend/Hibernation: --> είμαι στο ψάξιμο, νομίζω θα παίξει το suspend γιατί το μονο prob είναι ότι δεν ανοίγει το backlight της οθόνης κατά την επαναφορά ..

Power saving: --> out of the box

Γενικά θελει πολύ δουλειά γι’αυτό και το 70%

Δεν εχω πολύ χρονο να ασχοληθώ αλλα πιστεύω να παίξουν όλα, γιατι είναι σπαστικό να μην παίζουν fn keys suspend κτλ

Επισης βοηθησε:

http://gentoo-wiki.com/Macbook

http://www.google.gr/:cool:

[Spyrus]

Oύτε modem δε βλέπει.

Προσπάθησα με ndiswrapper να βάλω οδηγό για wlan αλλά δεν παίζει με τίποτα.

Ο Kernel είναι παλιός 2.6.11-smp x86-64 και πέρα ότι δεν κάνει compile το τελευταίο

ndiswrapper (μέχρι το 1.37 κάνει αλλά από 1.47 και πάνω δεν κάνει) θέλω να βάλω και

τους 64 μπιτους γιατί έτσι είναι στημένο το Suse. Η κάρτα είναι intel 6945ABG και κατέβασα

το inf από το site της. Μήπως πρέπει να το κάνω με το iw945 module;

Αυτό πάντως που θέλω να αποφύγω είναι compile kernel.