Jump to content



Ποια σειρα μου ταιριαζει?

kondax

Από kondax
In Linux

Recommended Posts

kondax Newbie

kondax

Ναι τα θυμαμαι μετα θα θελει και αλλα??????? :boxed::T: :X: :magic: :daisy:

  • Replies 318
  • Created
  • Last Reply
seph1roth Newbie

seph1roth

Αρχική απάντηση από kondax

Ναι τα θυμαμαι μετα θα θελει και αλλα??????? :boxed::T: :X: :magic: :daisy:

Εύχομαι πως όχι, αν εξαιρέσεις τα chap/pap.:confused: :devil: :nuke:

Αρχική απάντηση από kalamafka

seph1roth γιατι βγαζει 2 eth 1?

Ουσιαστικά δεν είναι δύο. Απλώς το ένα δείχνει τα statistics της γραμμής και το άλλο δείχνει ip addresses κτλ.

kondax Newbie

kondax

Εχω φτιαξει τα chap-pap (θελω να πιστευω!!!)

mike@mike-laptop:~$ pppd call ueagle-atm

Plugin pppoatm.so loaded.

mike@mike-laptop:~$ ifconfig

eth0 Link encap:Ethernet HWaddr 00:C0:9F:66:A5:9E

UP BROADCAST MULTICAST MTU:1500 Metric:1

RX packets:0 errors:0 dropped:0 overruns:0 frame:0

TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

Interrupt:10

eth1 Link encap:Ethernet HWaddr 00:12:F0:6E:2B:21

UP BROADCAST MULTICAST MTU:1500 Metric:1

RX packets:0 errors:0 dropped:0 overruns:0 frame:0

TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

Interrupt:11 Memory:d0214000-d0214fff

:laughing:

seph1roth Newbie

seph1roth

Έχεις internet τελικά? ’νοιξε και κανέναν browser να βλέπεις. Δεν έχει interface ppp0? Κάνε reboot χωρίς συνδεδεμένο modem και sudo kate /etc/network/interfaces. Αν έχει μέσα ότι αποθήκευσες με το nano, κλείστο και σύνδεσε το modem και μετά κλασσικά pppd call ueagle-atm . (αλλιώς αν δεν τα έχει ξαναπρόσθεσε τα). Και ενα

tail -f /var/log/syslog

παρακαλώ μετά από όλα αυτά.:T:

seph1roth Newbie

seph1roth

Αρχική απάντηση από kondax [Σήμερα, στις 16:54]

Aυτο μου εδωσε το dmesg(επισυναψη),αλλα τωρα παω να δω και για το tail!!!:banging: :help: :clap:

’στο, εντάξει. Για κάνε αυτά που σου λέω στο προηγούμενο ποστ μου. (Για το /etc/network/interfaces) (Όταν το έχεις σωστά θα πρέπει το ifconfig να εμφανίζει ppp0)

kondax Newbie

kondax

Λοιπον να και αυτο που θες(Πω πω σε εχω κουρασει και το ξερω!!):T:

mike@mike-laptop:~$ tail -f /var/log/syslog

May 16 16:58:07 mike-laptop kernel: [ 92.192000] ATM dev 0: usbatm_atm_close:

deallocating vcc 0xc706ace0 with vpi 8 vci 35

May 16 16:58:07 mike-laptop kernel: [ 92.192000] ATM dev 0: usbatm_cancel_send entered

May 16 16:58:07 mike-laptop kernel: [ 92.192000] ATM dev 0: usbatm_cancel_send done

May 16 16:58:07 mike-laptop kernel: [ 92.192000] ATM dev 0: usbatm_atm_close s uccessful

May 16 16:58:08 mike-laptop kernel: [ 93.392000] printk: 4995 messages suppres sed.

May 16 16:58:08 mike-laptop kernel: [ 93.392000] ATM dev 0: usbatm_rx_process: status -84 in frame 0!

May 16 16:58:13 mike-laptop kernel: [ 98.392000] printk: 5000 messages suppres sed.

May 16 16:58:13 mike-laptop kernel: [ 98.392000] ATM dev 0: usbatm_rx_process: status -84 in frame 0!

May 16 16:58:18 mike-laptop kernel: [ 103.392000] printk: 5003 messages suppres sed.

May 16 16:58:18 mike-laptop kernel: [ 103.392000] ATM dev 0: usbatm_rx_process: status -84 in frame 0!

May 16 16:58:23 mike-laptop kernel: [ 108.392000] printk: 5000 messages suppres sed.

May 16 16:58:23 mike-laptop kernel: [ 108.392000] ATM dev 0: usbatm_rx_process: status -84 in frame 0!

May 16 16:58:28 mike-laptop kernel: [ 113.392000] printk: 5000 messages suppressed.

May 16 16:58:28 mike-laptop kernel: [ 113.392000] ATM dev 0: usbatm_rx_process: status -84 in frame 0!

May 16 16:58:33 mike-laptop kernel: [ 118.392000] printk: 5000 messages suppressed.

May 16 16:58:33 mike-laptop kernel: [ 118.392000] ATM dev 0: usbatm_rx_process: status -84 in frame 0!

May 16 16:58:37 mike-laptop pppd[5244]: Using interface ppp0

May 16 16:58:37 mike-laptop pppd[5244]: Connect: ppp0 <--> 8.35

May 16 16:58:37 mike-laptop kernel: [ 122.200000] ATM dev 0: usbatm_atm_open: vpi 8, vci 35

May 16 16:58:37 mike-laptop kernel: [ 122.200000] ATM dev 0: usbatm_atm_open: allocated vcc data 0xd023ba00

May 16 16:58:38 mike-laptop kernel: [ 123.392000] printk: 5000 messages suppressed.

May 16 16:58:38 mike-laptop kernel: [ 123.392000] ATM dev 0: usbatm_rx_process: status -84 in frame 0!

May 16 16:58:43 mike-laptop kernel: [ 128.392000] printk: 5000 messages suppressed.

May 16 16:58:43 mike-laptop kernel: [ 128.392000] ATM dev 0: usbatm_rx_process: status -84 in frame 0!

May 16 16:58:48 mike-laptop kernel: [ 133.392000] printk: 5000 messages suppressed.

May 16 16:58:48 mike-laptop kernel: [ 133.392000] ATM dev 0: usbatm_rx_process: status -84 in frame 0!

May 16 16:58:53 mike-laptop kernel: [ 138.392000] printk: 5000 messages suppressed.

May 16 16:58:53 mike-laptop kernel: [ 138.392000] ATM dev 0: usbatm_rx_process: status -84 in frame 0!

May 16 16:58:58 mike-laptop kernel: [ 143.392000] printk: 5000 messages suppressed.

May 16 16:58:58 mike-laptop kernel: [ 143.392000] ATM dev 0: usbatm_rx_process: status -84 in frame 0!

May 16 16:59:03 mike-laptop kernel: [ 148.392000] printk: 5000 messages suppressed.

May 16 16:59:03 mike-laptop kernel: [ 148.392000] ATM dev 0: usbatm_rx_process: status -84 in frame 0!

May 16 16:59:07 mike-laptop pppd[5244]: LCP: timeout sending Config-Requests

May 16 16:59:07 mike-laptop pppd[5244]: Connection terminated.

May 16 16:59:07 mike-laptop pppd[5244]: Modem hangup

seph1roth Newbie

seph1roth

Λοιπόν δώσε:

ifconfig ppp0 και πες μου τι λέει.

Επίσης πριν το pppd call ueagle-atm γράφε

modprobe pppoatm

(Δηλαδή δώσε με τη σειρά pppd call ueagle-atm και μετά modprobe pppoatm)

(Δοκίμασε και το pon ueagle-atm λέμε τώρα)

Καμία κούραση:T::upside:

kondax Newbie

kondax

Λοιπον λεει:

mike@mike-laptop:~$ pppd call ueagle-atm

Plugin pppoatm.so loaded.

mike@mike-laptop:~$ ifconfig ppp0

ppp0 Link encap:Point-to-Point Protocol

POINTOPOINT NOARP MULTICAST MTU:1500 Metric:1

RX packets:0 errors:0 dropped:0 overruns:0 frame:0

TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:3

RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

Σε καλο δρομο ειμαστε???:T:

seph1roth Newbie

seph1roth

Αρχική απάντηση από kondax [Σήμερα, στις 17:44]

Λοιπον λεει:

mike@mike-laptop:~$ pppd call ueagle-atm

Plugin pppoatm.so loaded.

mike@mike-laptop:~$ ifconfig ppp0

ppp0 Link encap:Point-to-Point Protocol

POINTOPOINT NOARP MULTICAST MTU:1500 Metric:1

RX packets:0 errors:0 dropped:0 overruns:0 frame:0

TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:3

RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

Σε καλο δρομο ειμαστε???:T:

Ναι. Δώσε

sudo modprobe pppoatm

sudo pppd call ueagle-atm

και προσπάθησε να μπεις στο internet, π.χ. google. (αν δεν γίνει τίποτα προσπάθησε πάλι να μπεις με pon ueagle-atm (και αφού γράψεις αυτό δώσε κι ένα plog)

Και αν μπορείς δείξε τα chap/pap:clap:

kondax Newbie

kondax

πηγα να μπω στο internet απο konqueror αλλα δεν γινοταν τιποτα!!!

λοιπον να το chap

# Secrets for authentication using CHAP

# client server secret IP addresses

"το ονομα ispn" "*" "to password mou" "*"

και το pap¨¨

#

# /etc/ppp/pap-secrets

#

# This is a pap-secrets file to be used with the AUTO_PPP function of

# mgetty. mgetty-0.99 is preconfigured to startup pppd with the login option

# which will cause pppd to consult /etc/passwd (and /etc/shadow in turn)

# after a user has passed this file. Don't be disturbed therefore by the fact

# that this file defines logins with any password for users. /etc/passwd

# (again, /etc/shadow, too) will catch passwd mismatches.

#

# This file should block ALL users that should not be able to do AUTO_PPP.

# AUTO_PPP bypasses the usual login program so it's necessary to list all

# system userids with regular passwords here.

#

# ATTENTION: The definitions here can allow users to login without a

# password if you don't use the login option of pppd! The mgetty Debian

# package already provides this option; make sure you don't change that.

# INBOUND connections

# Every regular user can use PPP and has to use passwords from /etc/passwd

* hostname "" *

# UserIDs that cannot use PPP at all. Check your /etc/passwd and add any

# other accounts that should not be able to use pppd!

guest hostname "*" -

master hostname "*" -

root hostname "*" -

support hostname "*" -

stats hostname "*" -

# OUTBOUND connections

# Here you should add your userid password to connect to your providers via

# PAP. The * means that the password is to be used for ANY host you connect

# to. Thus you do not have to worry about the foreign machine name. Just

# replace password with your password.

# If you have different providers with different passwords then you better

# remove the following line.

# * to username ispn

:banging:

seph1roth Newbie

seph1roth

Έτσι πρέπει να είναι το pap (τελευταία γραμμή χωρίς #, όπως στο chap):

#

# /etc/ppp/pap-secrets

#

# This is a pap-secrets file to be used with the AUTO_PPP function of

# mgetty. mgetty-0.99 is preconfigured to startup pppd with the login option

# which will cause pppd to consult /etc/passwd (and /etc/shadow in turn)

# after a user has passed this file. Don't be disturbed therefore by the fact

# that this file defines logins with any password for users. /etc/passwd

# (again, /etc/shadow, too) will catch passwd mismatches.

#

# This file should block ALL users that should not be able to do AUTO_PPP.

# AUTO_PPP bypasses the usual login program so it's necessary to list all

# system userids with regular passwords here.

#

# ATTENTION: The definitions here can allow users to login without a

# password if you don't use the login option of pppd! The mgetty Debian

# package already provides this option; make sure you don't change that.

# INBOUND connections

# Every regular user can use PPP and has to use passwords from /etc/passwd

* hostname "" *

# UserIDs that cannot use PPP at all. Check your /etc/passwd and add any

# other accounts that should not be able to use pppd!

guest hostname "*" -

master hostname "*" -

root hostname "*" -

support hostname "*" -

stats hostname "*" -

# OUTBOUND connections

# Here you should add your userid password to connect to your providers via

# PAP. The * means that the password is to be used for ANY host you connect

# to. Thus you do not have to worry about the foreign machine name. Just

# replace password with your password.

# If you have different providers with different passwords then you better

# remove the following line.

"το ονομα ispn" "*" "to password mou" "*"

Για ξαναδοκίμασε να συνδεθείς τώρα

kondax Newbie

kondax

Seph1roth πολυ κοντα.............!!!!!:banging:

δες το ppp0 που μας ενδιαφερει

mike@mike-laptop:~$ ifconfig

eth0 Link encap:Ethernet HWaddr 00:C0:9F:66:A5:9E

UP BROADCAST MULTICAST MTU:1500 Metric:1

RX packets:0 errors:0 dropped:0 overruns:0 frame:0

TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

Interrupt:10

eth1 Link encap:Ethernet HWaddr 00:12:F0:6E:2B:21

UP BROADCAST MULTICAST MTU:1500 Metric:1

RX packets:0 errors:0 dropped:0 overruns:0 frame:0

TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

Interrupt:11 Base address:0xa000 Memory:d0214000-d0214fff

ppp0 Link encap:Point-to-Point Protocol

inet addr:83.212.47.80 P-t-P:83.212.27.230 Mask:255.255.255.255

UP POINTOPOINT RUNNING NOARP MULTICAST MTU:9178 Metric:1

RX packets:4 errors:0 dropped:0 overruns:0 frame:0

TX packets:5 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:3

RX bytes:64 (64.0 B) TX bytes:97 (97.0 B)

seph1roth Newbie

seph1roth

Μπαίνει στο internet? Δεν βλέπω κανένα πρόβλημα. Ίσα-ίσα και πακέτα στάλθηκαν οπότε το modem δουλεύει και παίρνει και ip. Για πες μου τι λέει το plog. Μήπως από εδώ και πέρα είναι θέμα dhcp ή τίποτα άλλο? Στέρεψα από ιδέες ο έρμος:tomato:

kondax Newbie

kondax

Α ρε παιχτη εισαι ο καλυτερος!!!!!!

ναι παιρνει ip αλλα μπηκα στο konqueror και δεν με εβαζε πουθενα !!

Δεν ξερω τι να πω??!!!!:T:

παω να ξαναδοκιμασω!!

kondax Newbie

kondax

ΛΟιπον

mike@mike-laptop:~$ plog

May 16 18:51:07 mike-laptop pppd[5308]: Plugin pppoatm.so loaded.

May 16 18:51:07 mike-laptop pppd[5309]: pppd 2.4.4 started by root, uid 0

May 16 18:51:07 mike-laptop pppd[5309]: connect(8.35): Address already in use

May 16 18:51:07 mike-laptop pppd[5309]: Exit.

mike@mike-laptop:~$ ifconfig ppp0

ppp0 Link encap:Point-to-Point Protocol

inet addr:83.212.47.121 P-t-P:83.212.27.225 Mask:255.255.255.255

UP POINTOPOINT RUNNING NOARP MULTICAST MTU:9178 Metric:1

RX packets:48 errors:0 dropped:0 overruns:0 frame:0

TX packets:40 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:3

RX bytes:3858 (3.7 KiB) TX bytes:2857 (2.7 KiB)

Τι λες???Τι γινεται???

seph1roth Newbie

seph1roth

Αρχική απάντηση από kondax [Σήμερα, στις 19:02]

ΛΟιπον

mike@mike-laptop:~$ plog

May 16 18:51:07 mike-laptop pppd[5308]: Plugin pppoatm.so loaded.

May 16 18:51:07 mike-laptop pppd[5309]: pppd 2.4.4 started by root, uid 0

May 16 18:51:07 mike-laptop pppd[5309]: connect(8.35): Address already in use

May 16 18:51:07 mike-laptop pppd[5309]: Exit.

mike@mike-laptop:~$ ifconfig ppp0

ppp0 Link encap:Point-to-Point Protocol

inet addr:83.212.47.121 P-t-P:83.212.27.225 Mask:255.255.255.255

UP POINTOPOINT RUNNING NOARP MULTICAST MTU:9178 Metric:1

RX packets:48 errors:0 dropped:0 overruns:0 frame:0

TX packets:40 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:3

RX bytes:3858 (3.7 KiB) TX bytes:2857 (2.7 KiB)

Τι λες???Τι γινεται???

Για κάνε reboot και ξαναδώσε pon ueagle-atm ή τις άλλες δύο εντολές και ξαναπάτα plog. Λογικά θα έχει αλλάξει IP ή ότι άλλο θέλει.

kondax Newbie

kondax

ok θα το κανω και θα ποσταρω !!!!

Εχω μια δουλεια και σε καμια ωρα θα ειμαι πισω !!!

καλη συνεχεια!!

τα λεμε:banging: :clap: :hi:

kalamafka Newbie

kalamafka

ppp0 Link encapoint-to-Point Protocol

inet addr:83.212.47.121 P-t-P:83.212.27.225 Mask:255.255.255.255

UP POINTOPOINT RUNNING NOARP MULTICAST MTU:9178 Metric:1

RX packets:48 errors:0 dropped:0 overruns:0 frame:0

TX packets:40 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:3

RX bytes:3858 (3.7 KiB) TX bytes:2857 (2.7 KiB):inlove::upside::T::cool:

Archived

This topic is now archived and is closed to further replies.

Λίστα θεμάτων
×
×
  • Δημιουργία...

Important Information

Ο ιστότοπος theLab.gr χρησιμοποιεί cookies για να διασφαλίσει την καλύτερη εμπειρία σας κατά την περιήγηση. Μπορείτε να προσαρμόσετε τις ρυθμίσεις των cookies σας , διαφορετικά θα υποθέσουμε ότι είστε εντάξει για να συνεχίσετε.