Jump to content



Ποια σειρα μου ταιριαζει?

kondax

Από kondax
In Linux

Recommended Posts

  • Replies 318
  • Created
  • Last Reply
seph1roth Newbie

seph1roth

Αρχική απάντηση από kondax

Ναι τα θυμαμαι μετα θα θελει και αλλα??????? :boxed::T: :X: :magic: :daisy:

Εύχομαι πως όχι, αν εξαιρέσεις τα chap/pap.:confused: :devil: :nuke:

Αρχική απάντηση από kalamafka

seph1roth γιατι βγαζει 2 eth 1?

Ουσιαστικά δεν είναι δύο. Απλώς το ένα δείχνει τα statistics της γραμμής και το άλλο δείχνει ip addresses κτλ.

Link to comment
Share on other sites
kondax Newbie

kondax

Εχω φτιαξει τα chap-pap (θελω να πιστευω!!!)

mike@mike-laptop:~$ pppd call ueagle-atm

Plugin pppoatm.so loaded.

mike@mike-laptop:~$ ifconfig

eth0 Link encap:Ethernet HWaddr 00:C0:9F:66:A5:9E

UP BROADCAST MULTICAST MTU:1500 Metric:1

RX packets:0 errors:0 dropped:0 overruns:0 frame:0

TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

Interrupt:10

eth1 Link encap:Ethernet HWaddr 00:12:F0:6E:2B:21

UP BROADCAST MULTICAST MTU:1500 Metric:1

RX packets:0 errors:0 dropped:0 overruns:0 frame:0

TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

Interrupt:11 Memory:d0214000-d0214fff

:laughing:

Link to comment
Share on other sites
seph1roth Newbie

seph1roth

Έχεις internet τελικά? ’νοιξε και κανέναν browser να βλέπεις. Δεν έχει interface ppp0? Κάνε reboot χωρίς συνδεδεμένο modem και sudo kate /etc/network/interfaces. Αν έχει μέσα ότι αποθήκευσες με το nano, κλείστο και σύνδεσε το modem και μετά κλασσικά pppd call ueagle-atm . (αλλιώς αν δεν τα έχει ξαναπρόσθεσε τα). Και ενα

tail -f /var/log/syslog

παρακαλώ μετά από όλα αυτά.:T:

Link to comment
Share on other sites
seph1roth Newbie

seph1roth

Αρχική απάντηση από kondax [Σήμερα, στις 16:54]

Aυτο μου εδωσε το dmesg(επισυναψη),αλλα τωρα παω να δω και για το tail!!!:banging: :help: :clap:

’στο, εντάξει. Για κάνε αυτά που σου λέω στο προηγούμενο ποστ μου. (Για το /etc/network/interfaces) (Όταν το έχεις σωστά θα πρέπει το ifconfig να εμφανίζει ppp0)

Link to comment
Share on other sites
kondax Newbie

kondax

Λοιπον να και αυτο που θες(Πω πω σε εχω κουρασει και το ξερω!!):T:

mike@mike-laptop:~$ tail -f /var/log/syslog

May 16 16:58:07 mike-laptop kernel: [ 92.192000] ATM dev 0: usbatm_atm_close:

deallocating vcc 0xc706ace0 with vpi 8 vci 35

May 16 16:58:07 mike-laptop kernel: [ 92.192000] ATM dev 0: usbatm_cancel_send entered

May 16 16:58:07 mike-laptop kernel: [ 92.192000] ATM dev 0: usbatm_cancel_send done

May 16 16:58:07 mike-laptop kernel: [ 92.192000] ATM dev 0: usbatm_atm_close s uccessful

May 16 16:58:08 mike-laptop kernel: [ 93.392000] printk: 4995 messages suppres sed.

May 16 16:58:08 mike-laptop kernel: [ 93.392000] ATM dev 0: usbatm_rx_process: status -84 in frame 0!

May 16 16:58:13 mike-laptop kernel: [ 98.392000] printk: 5000 messages suppres sed.

May 16 16:58:13 mike-laptop kernel: [ 98.392000] ATM dev 0: usbatm_rx_process: status -84 in frame 0!

May 16 16:58:18 mike-laptop kernel: [ 103.392000] printk: 5003 messages suppres sed.

May 16 16:58:18 mike-laptop kernel: [ 103.392000] ATM dev 0: usbatm_rx_process: status -84 in frame 0!

May 16 16:58:23 mike-laptop kernel: [ 108.392000] printk: 5000 messages suppres sed.

May 16 16:58:23 mike-laptop kernel: [ 108.392000] ATM dev 0: usbatm_rx_process: status -84 in frame 0!

May 16 16:58:28 mike-laptop kernel: [ 113.392000] printk: 5000 messages suppressed.

May 16 16:58:28 mike-laptop kernel: [ 113.392000] ATM dev 0: usbatm_rx_process: status -84 in frame 0!

May 16 16:58:33 mike-laptop kernel: [ 118.392000] printk: 5000 messages suppressed.

May 16 16:58:33 mike-laptop kernel: [ 118.392000] ATM dev 0: usbatm_rx_process: status -84 in frame 0!

May 16 16:58:37 mike-laptop pppd[5244]: Using interface ppp0

May 16 16:58:37 mike-laptop pppd[5244]: Connect: ppp0 <--> 8.35

May 16 16:58:37 mike-laptop kernel: [ 122.200000] ATM dev 0: usbatm_atm_open: vpi 8, vci 35

May 16 16:58:37 mike-laptop kernel: [ 122.200000] ATM dev 0: usbatm_atm_open: allocated vcc data 0xd023ba00

May 16 16:58:38 mike-laptop kernel: [ 123.392000] printk: 5000 messages suppressed.

May 16 16:58:38 mike-laptop kernel: [ 123.392000] ATM dev 0: usbatm_rx_process: status -84 in frame 0!

May 16 16:58:43 mike-laptop kernel: [ 128.392000] printk: 5000 messages suppressed.

May 16 16:58:43 mike-laptop kernel: [ 128.392000] ATM dev 0: usbatm_rx_process: status -84 in frame 0!

May 16 16:58:48 mike-laptop kernel: [ 133.392000] printk: 5000 messages suppressed.

May 16 16:58:48 mike-laptop kernel: [ 133.392000] ATM dev 0: usbatm_rx_process: status -84 in frame 0!

May 16 16:58:53 mike-laptop kernel: [ 138.392000] printk: 5000 messages suppressed.

May 16 16:58:53 mike-laptop kernel: [ 138.392000] ATM dev 0: usbatm_rx_process: status -84 in frame 0!

May 16 16:58:58 mike-laptop kernel: [ 143.392000] printk: 5000 messages suppressed.

May 16 16:58:58 mike-laptop kernel: [ 143.392000] ATM dev 0: usbatm_rx_process: status -84 in frame 0!

May 16 16:59:03 mike-laptop kernel: [ 148.392000] printk: 5000 messages suppressed.

May 16 16:59:03 mike-laptop kernel: [ 148.392000] ATM dev 0: usbatm_rx_process: status -84 in frame 0!

May 16 16:59:07 mike-laptop pppd[5244]: LCP: timeout sending Config-Requests

May 16 16:59:07 mike-laptop pppd[5244]: Connection terminated.

May 16 16:59:07 mike-laptop pppd[5244]: Modem hangup

Link to comment
Share on other sites
seph1roth Newbie

seph1roth

Λοιπόν δώσε:

ifconfig ppp0 και πες μου τι λέει.

Επίσης πριν το pppd call ueagle-atm γράφε

modprobe pppoatm

(Δηλαδή δώσε με τη σειρά pppd call ueagle-atm και μετά modprobe pppoatm)

(Δοκίμασε και το pon ueagle-atm λέμε τώρα)

Καμία κούραση:T::upside:

Link to comment
Share on other sites
kondax Newbie

kondax

Λοιπον λεει:

mike@mike-laptop:~$ pppd call ueagle-atm

Plugin pppoatm.so loaded.

mike@mike-laptop:~$ ifconfig ppp0

ppp0 Link encap:Point-to-Point Protocol

POINTOPOINT NOARP MULTICAST MTU:1500 Metric:1

RX packets:0 errors:0 dropped:0 overruns:0 frame:0

TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:3

RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

Σε καλο δρομο ειμαστε???:T:

Link to comment
Share on other sites
seph1roth Newbie

seph1roth

Αρχική απάντηση από kondax [Σήμερα, στις 17:44]

Λοιπον λεει:

mike@mike-laptop:~$ pppd call ueagle-atm

Plugin pppoatm.so loaded.

mike@mike-laptop:~$ ifconfig ppp0

ppp0 Link encap:Point-to-Point Protocol

POINTOPOINT NOARP MULTICAST MTU:1500 Metric:1

RX packets:0 errors:0 dropped:0 overruns:0 frame:0

TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:3

RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

Σε καλο δρομο ειμαστε???:T:

Ναι. Δώσε

sudo modprobe pppoatm

sudo pppd call ueagle-atm

και προσπάθησε να μπεις στο internet, π.χ. google. (αν δεν γίνει τίποτα προσπάθησε πάλι να μπεις με pon ueagle-atm (και αφού γράψεις αυτό δώσε κι ένα plog)

Και αν μπορείς δείξε τα chap/pap:clap:

Link to comment
Share on other sites
kondax Newbie

kondax

πηγα να μπω στο internet απο konqueror αλλα δεν γινοταν τιποτα!!!

λοιπον να το chap

# Secrets for authentication using CHAP

# client server secret IP addresses

"το ονομα ispn" "*" "to password mou" "*"

και το pap¨¨

#

# /etc/ppp/pap-secrets

#

# This is a pap-secrets file to be used with the AUTO_PPP function of

# mgetty. mgetty-0.99 is preconfigured to startup pppd with the login option

# which will cause pppd to consult /etc/passwd (and /etc/shadow in turn)

# after a user has passed this file. Don't be disturbed therefore by the fact

# that this file defines logins with any password for users. /etc/passwd

# (again, /etc/shadow, too) will catch passwd mismatches.

#

# This file should block ALL users that should not be able to do AUTO_PPP.

# AUTO_PPP bypasses the usual login program so it's necessary to list all

# system userids with regular passwords here.

#

# ATTENTION: The definitions here can allow users to login without a

# password if you don't use the login option of pppd! The mgetty Debian

# package already provides this option; make sure you don't change that.

# INBOUND connections

# Every regular user can use PPP and has to use passwords from /etc/passwd

* hostname "" *

# UserIDs that cannot use PPP at all. Check your /etc/passwd and add any

# other accounts that should not be able to use pppd!

guest hostname "*" -

master hostname "*" -

root hostname "*" -

support hostname "*" -

stats hostname "*" -

# OUTBOUND connections

# Here you should add your userid password to connect to your providers via

# PAP. The * means that the password is to be used for ANY host you connect

# to. Thus you do not have to worry about the foreign machine name. Just

# replace password with your password.

# If you have different providers with different passwords then you better

# remove the following line.

# * to username ispn

:banging:

Link to comment
Share on other sites
seph1roth Newbie

seph1roth

Έτσι πρέπει να είναι το pap (τελευταία γραμμή χωρίς #, όπως στο chap):

#

# /etc/ppp/pap-secrets

#

# This is a pap-secrets file to be used with the AUTO_PPP function of

# mgetty. mgetty-0.99 is preconfigured to startup pppd with the login option

# which will cause pppd to consult /etc/passwd (and /etc/shadow in turn)

# after a user has passed this file. Don't be disturbed therefore by the fact

# that this file defines logins with any password for users. /etc/passwd

# (again, /etc/shadow, too) will catch passwd mismatches.

#

# This file should block ALL users that should not be able to do AUTO_PPP.

# AUTO_PPP bypasses the usual login program so it's necessary to list all

# system userids with regular passwords here.

#

# ATTENTION: The definitions here can allow users to login without a

# password if you don't use the login option of pppd! The mgetty Debian

# package already provides this option; make sure you don't change that.

# INBOUND connections

# Every regular user can use PPP and has to use passwords from /etc/passwd

* hostname "" *

# UserIDs that cannot use PPP at all. Check your /etc/passwd and add any

# other accounts that should not be able to use pppd!

guest hostname "*" -

master hostname "*" -

root hostname "*" -

support hostname "*" -

stats hostname "*" -

# OUTBOUND connections

# Here you should add your userid password to connect to your providers via

# PAP. The * means that the password is to be used for ANY host you connect

# to. Thus you do not have to worry about the foreign machine name. Just

# replace password with your password.

# If you have different providers with different passwords then you better

# remove the following line.

"το ονομα ispn" "*" "to password mou" "*"

Για ξαναδοκίμασε να συνδεθείς τώρα

Link to comment
Share on other sites
kondax Newbie

kondax

Seph1roth πολυ κοντα.............!!!!!:banging:

δες το ppp0 που μας ενδιαφερει

mike@mike-laptop:~$ ifconfig

eth0 Link encap:Ethernet HWaddr 00:C0:9F:66:A5:9E

UP BROADCAST MULTICAST MTU:1500 Metric:1

RX packets:0 errors:0 dropped:0 overruns:0 frame:0

TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

Interrupt:10

eth1 Link encap:Ethernet HWaddr 00:12:F0:6E:2B:21

UP BROADCAST MULTICAST MTU:1500 Metric:1

RX packets:0 errors:0 dropped:0 overruns:0 frame:0

TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

Interrupt:11 Base address:0xa000 Memory:d0214000-d0214fff

ppp0 Link encap:Point-to-Point Protocol

inet addr:83.212.47.80 P-t-P:83.212.27.230 Mask:255.255.255.255

UP POINTOPOINT RUNNING NOARP MULTICAST MTU:9178 Metric:1

RX packets:4 errors:0 dropped:0 overruns:0 frame:0

TX packets:5 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:3

RX bytes:64 (64.0 B) TX bytes:97 (97.0 B)

Link to comment
Share on other sites
seph1roth Newbie

seph1roth

Μπαίνει στο internet? Δεν βλέπω κανένα πρόβλημα. Ίσα-ίσα και πακέτα στάλθηκαν οπότε το modem δουλεύει και παίρνει και ip. Για πες μου τι λέει το plog. Μήπως από εδώ και πέρα είναι θέμα dhcp ή τίποτα άλλο? Στέρεψα από ιδέες ο έρμος:tomato:

Link to comment
Share on other sites
kondax Newbie

kondax

Α ρε παιχτη εισαι ο καλυτερος!!!!!!

ναι παιρνει ip αλλα μπηκα στο konqueror και δεν με εβαζε πουθενα !!

Δεν ξερω τι να πω??!!!!:T:

παω να ξαναδοκιμασω!!

Link to comment
Share on other sites
kondax Newbie

kondax

ΛΟιπον

mike@mike-laptop:~$ plog

May 16 18:51:07 mike-laptop pppd[5308]: Plugin pppoatm.so loaded.

May 16 18:51:07 mike-laptop pppd[5309]: pppd 2.4.4 started by root, uid 0

May 16 18:51:07 mike-laptop pppd[5309]: connect(8.35): Address already in use

May 16 18:51:07 mike-laptop pppd[5309]: Exit.

mike@mike-laptop:~$ ifconfig ppp0

ppp0 Link encap:Point-to-Point Protocol

inet addr:83.212.47.121 P-t-P:83.212.27.225 Mask:255.255.255.255

UP POINTOPOINT RUNNING NOARP MULTICAST MTU:9178 Metric:1

RX packets:48 errors:0 dropped:0 overruns:0 frame:0

TX packets:40 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:3

RX bytes:3858 (3.7 KiB) TX bytes:2857 (2.7 KiB)

Τι λες???Τι γινεται???

Link to comment
Share on other sites
seph1roth Newbie

seph1roth

Αρχική απάντηση από kondax [Σήμερα, στις 19:02]

ΛΟιπον

mike@mike-laptop:~$ plog

May 16 18:51:07 mike-laptop pppd[5308]: Plugin pppoatm.so loaded.

May 16 18:51:07 mike-laptop pppd[5309]: pppd 2.4.4 started by root, uid 0

May 16 18:51:07 mike-laptop pppd[5309]: connect(8.35): Address already in use

May 16 18:51:07 mike-laptop pppd[5309]: Exit.

mike@mike-laptop:~$ ifconfig ppp0

ppp0 Link encap:Point-to-Point Protocol

inet addr:83.212.47.121 P-t-P:83.212.27.225 Mask:255.255.255.255

UP POINTOPOINT RUNNING NOARP MULTICAST MTU:9178 Metric:1

RX packets:48 errors:0 dropped:0 overruns:0 frame:0

TX packets:40 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:3

RX bytes:3858 (3.7 KiB) TX bytes:2857 (2.7 KiB)

Τι λες???Τι γινεται???

Για κάνε reboot και ξαναδώσε pon ueagle-atm ή τις άλλες δύο εντολές και ξαναπάτα plog. Λογικά θα έχει αλλάξει IP ή ότι άλλο θέλει.

Link to comment
Share on other sites
kalamafka Newbie

kalamafka

ppp0 Link encapoint-to-Point Protocol

inet addr:83.212.47.121 P-t-P:83.212.27.225 Mask:255.255.255.255

UP POINTOPOINT RUNNING NOARP MULTICAST MTU:9178 Metric:1

RX packets:48 errors:0 dropped:0 overruns:0 frame:0

TX packets:40 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:3

RX bytes:3858 (3.7 KiB) TX bytes:2857 (2.7 KiB):inlove::upside::T::cool:

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

Λίστα θεμάτων
×
×
  • Δημιουργία...

Important Information

Ο ιστότοπος theLab.gr χρησιμοποιεί cookies για να διασφαλίσει την καλύτερη εμπειρία σας κατά την περιήγηση. Μπορείτε να προσαρμόσετε τις ρυθμίσεις των cookies σας , διαφορετικά θα υποθέσουμε ότι είστε εντάξει για να συνεχίσετε.