Jump to content



Recommended Posts

To μονο που βρηκα στο net ειναι απο ενα ποστ του shamino στο vr-zone

Ok, this is the only way i can help.

set vdimm to 2.7v.

save and exit

turn off pc

http://www.vr-zone.com.sg/Shamino/julypro/vm1.gif

flip the board over to its behind

look for the fourth pin right behind the dimm slot as indicated in the pic

measure the voltage on this pin as pc is running, be careful

it shd read ~ 2.7v.

now mark down that pin.

next measure the pin directly behind the board where the atx connector is located at the spot makred in pic.

it should read 3.3v

turn everything off.

solder a wire directly from the dimm pin to this 3.3v pin with a thick wire. Use a molex connector inbetween if you wanna to able to tunr on and off the mod

now your vdimm shd be = to +3.3v

Tι mod ψαχνεις?

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Δημιουργία...

Important Information

Ο ιστότοπος theLab.gr χρησιμοποιεί cookies για να διασφαλίσει την καλύτερη εμπειρία σας κατά την περιήγηση. Μπορείτε να προσαρμόσετε τις ρυθμίσεις των cookies σας , διαφορετικά θα υποθέσουμε ότι είστε εντάξει για να συνεχίσετε.