deninho Δημοσιεύτηκε Σεπτέμβριος 21, 2013 #1 Κοινοποίηση Δημοσιεύτηκε Σεπτέμβριος 21, 2013 επιγραμματικά τα λέει ο τίτλος.Πέρασα στο λαπτοπ το Linux mint 15 lxde, και ενώ φαίνεται σαν να έχει περαστεί κανονικά ο driver για τον ήχο δεν ακούγεται τίποτα. ούτε βίντεο από youtube, ούτε mp3 ούτε wav. Ούτε από τα ηχεία του laptop ούτε από τα ακουστικά (αν και αυτό δεν το πολυεμπιστεύομαι γιατί το βύσμα είχε ξεχαρβαλωθεί)Ακολούθησα το tutorial: Installing Realtek ALC892 Audio Driver on Linux Mint - Linux Mint Community μόνο που κατέβασα τους τελευταίους drivers (5,18) και πάλι τίποτα.Όλα τα sliders στο audio panel είναι τερματισμέναΚαμιά ιδέα από τους εμπειρότερους; Link to comment Share on other sites More sharing options...
trendy Σεπτέμβριος 21, 2013 #2 Κοινοποίηση Σεπτέμβριος 21, 2013 lspcilsusblsmod Βεβαιώσου ότι η σωστή κάρτα είναι επιλεγμένη τόσο στο hardware όσο και στο output. Βγάλε όλα τα mute από όλες τις φέτες στο μείκτη. Βεβαιώσου ότι όλες οι δυνατές φέτες εμφανίζονται στο μείκτη. Καμιά φορά μερικές δεν είναι επιλεγμένες και δε φαίνονται. Link to comment Share on other sites More sharing options...
deninho Σεπτέμβριος 23, 2013 Author #3 Κοινοποίηση Σεπτέμβριος 23, 2013 lspci 00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03)00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04)00:1d.0 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04)00:1d.1 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04)00:1d.2 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04)00:1d.3 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04)00:1d.7 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04)00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4)00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04)00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 04)00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04)01:00.0 VGA compatible controller: NVIDIA Corporation NV44M [GeForce Go 6200] (rev a1)06:03.0 CardBus bridge: Texas Instruments PCI7420 CardBus Controller06:03.2 FireWire (IEEE 1394): Texas Instruments PCI7x20 1394a-2000 OHCI Two-Port PHY/Link-Layer Controller06:03.3 Mass storage controller: Texas Instruments PCI7420/7620 Combo CardBus, 1394a-2000 OHCI and SD/MS-Pro Controller06:04.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)06:08.0 Ethernet controller: Intel Corporation 82562ET/EZ/GT/GZ - PRO/100 VE (LOM) Ethernet Controller Mobile (rev 04) lsusb Bus 003 Device 002: ID 045e:007d Microsoft Corp. Notebook Optical MouseBus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubBus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubBus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubBus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubBus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub lsmod Module Size Used bylib80211_crypt_ccmp 12743 2 parport_pc 27504 0 ppdev 12817 0 rfcomm 37420 4 bnep 17669 2 bluetooth 202069 10 bnep,rfcommbinfmt_misc 17260 1 pcmcia 39544 0 tifm_sd 17419 0 joydev 17097 0 snd_hda_codec_realtek 41147 1 ipw2200 140461 0 snd_hda_intel 42620 3 snd_hda_codec 164188 2 snd_hda_codec_realtek,snd_hda_intelsnd_hwdep 13272 1 snd_hda_codecnvidia 10287297 33 yenta_socket 27095 0 snd_pcm 80965 2 snd_hda_codec,snd_hda_intellibipw 33170 1 ipw2200snd_page_alloc 14230 2 snd_pcm,snd_hda_intelsony_laptop 44238 0 lib80211 14040 3 lib80211_crypt_ccmp,libipw,ipw2200tifm_7xx1 12905 0 snd_seq 55376 0 pcmcia_rsrc 18191 1 yenta_socketsnd_seq_device 14137 1 snd_seqtifm_core 15068 2 tifm_7xx1,tifm_sdcfg80211 436177 2 libipw,ipw2200snd_timer 24318 2 snd_pcm,snd_seqmac_hid 13037 0 pcmcia_core 21505 3 pcmcia,pcmcia_rsrc,yenta_socketdm_multipath 22402 0 scsi_dh 14427 1 dm_multipathsnd 61097 14 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_seq,snd_hda_codec,snd_hda_intel,snd_seq_devicelpc_ich 16925 0 microcode 18286 0 psmouse 81038 0 serio_raw 13031 0 soundcore 12600 1 sndlp 13299 0 parport 40753 3 lp,ppdev,parport_pcbtrfs 774622 0 zlib_deflate 26445 1 btrfslibcrc32c 12543 1 btrfsdm_raid45 75357 0 xor 26062 1 dm_raid45dm_mirror 21621 0 dm_region_hash 16012 1 dm_mirrordm_log 18137 3 dm_region_hash,dm_mirror,dm_raid45hid_generic 12484 0 usbhid 41805 0 hid 82666 2 hid_generic,usbhidfirewire_ohci 35292 0 firewire_core 61718 1 firewire_ohcie100 35903 0 crc_itu_t 12627 1 firewire_corevideo 18894 0 Αυτό το παράθυρο για τα sound preferences δεν το βρίσκω πουθενά. Αυτό που έχω, από το εικονίδιο με το μεγάφωνο κάτω δεξιά είναι αυτό: Μήπως μου λείπει κάτι από το λειτουργικό; ΥΓ Επίσης, alsamixer στο τερματικό (νομίζω είναι το ίδιο, αλλά το βάζω just in case) Link to comment Share on other sites More sharing options...
trendy Σεπτέμβριος 23, 2013 #4 Κοινοποίηση Σεπτέμβριος 23, 2013 Στο audio mixer πάτα το select controls και βεβαιώσου ότι είναι όλα επιλεγμένα και unmuted. Στο sound card δε σου δείχνει άλλη κάρτα; (πχ hdmi της κάρτας γραφικών) Link to comment Share on other sites More sharing options...
deninho Σεπτέμβριος 23, 2013 Author #5 Κοινοποίηση Σεπτέμβριος 23, 2013 όλα επιλεγμένα είναι και ενεργά είναι, και οι επιλογές που έχει το audiomixer είναι οι παρακάτω (στις οποίες ότι δίνεται το έχω ενεργοποιήσει και το έχω βάλει στο φουλ) και στο alsamixer: Link to comment Share on other sites More sharing options...
trendy Σεπτέμβριος 23, 2013 #6 Κοινοποίηση Σεπτέμβριος 23, 2013 Δοκίμασε aplay -lκαι πες μου τι σου βγάζει. Επίσης το grep 'audio' /etc/groupπρέπει να περιέχει το χρήστη σου.Τέλος κάνε καλού κακού και αυτόsudo apt-get --purge remove linux-sound-base alsa-base alsa-utilssudo apt-get install linux-sound-base alsa-base alsa-utilssudo rebootΑν σου σβήσει από dependencies και τίποτα άλλο, το προσθέτεις με τη δεύτερη εντολή. Link to comment Share on other sites More sharing options...
deninho Σεπτέμβριος 23, 2013 Author #7 Κοινοποίηση Σεπτέμβριος 23, 2013 Κατ'αρχάς να σε ευχαριστήσω πολύ για το χρόνο σου και τη βοήθειά σου Αν έρθεις κανένα καλοκαίρι Κεφαλονιά σου χρωστάω κέρασμα Δοκίμασε aplay -l και πες μου τι σου βγάζει. **** List of PLAYBACK Hardware Devices ****card 0: Intel [HDA Intel], device 0: ALC260 Analog [ALC260 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0card 0: Intel [HDA Intel], device 1: ALC260 Digital [ALC260 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 Επίσης το grep 'audio' /etc/group πρέπει να περιέχει το χρήστη σου. audio:x:29:pulse (όνομα χρήστη είναι το user) και, τέλος, η απεγκατάσταση και επανεγκατάσταση αυτών που μου είπες (και το ριμπούτ), δεν έφερε κανένα αποτέλεσμα :flag: Link to comment Share on other sites More sharing options...
trendy Σεπτέμβριος 24, 2013 #8 Κοινοποίηση Σεπτέμβριος 24, 2013 Κατ'αρχάς να σε ευχαριστήσω πολύ για το χρόνο σου και τη βοήθειά σου Αν έρθεις κανένα καλοκαίρι Κεφαλονιά σου χρωστάω κέρασμα **** List of PLAYBACK Hardware Devices ****card 0: Intel [HDA Intel], device 0: ALC260 Analog [ALC260 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0card 0: Intel [HDA Intel], device 1: ALC260 Digital [ALC260 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 audio:x:29:pulse (όνομα χρήστη είναι το user) και, τέλος, η απεγκατάσταση και επανεγκατάσταση αυτών που μου είπες (και το ριμπούτ), δεν έφερε κανένα αποτέλεσμα :flag: 2 επιλογές: Ή κάνεις ένα edit το αρχείο χεράτα ώστε να προσθέσεις το χρήστη σου με κόμμα μετά το pulse ή πας στο control center -> users and groups -> groups και στο audio προσθέτεις το χρήστη σου. Μετά αν δε δουλέψει κάνε ένα logout login. Link to comment Share on other sites More sharing options...
deninho Σεπτέμβριος 24, 2013 Author #9 Κοινοποίηση Σεπτέμβριος 24, 2013 συνεχίζει στο ίδιο βιολί... Ήχος ακούγεται κανονικά από τα ηχεία όταν εμφανίζει το λόγκο "VAIO" στο boot του laptop. Δεν εννοώ το beep από το POST. Link to comment Share on other sites More sharing options...
trendy Σεπτέμβριος 24, 2013 #10 Κοινοποίηση Σεπτέμβριος 24, 2013 Να δω αν υπάρχει κανένα ιδιαίτερο θέμα με το λαπτοπ σου γιατί το έχω εξαντλήσει το κυνήγι του προβλήματος. Link to comment Share on other sites More sharing options...
ganastasiou Σεπτέμβριος 24, 2013 #11 Κοινοποίηση Σεπτέμβριος 24, 2013 Δώσε $ speaker-test από τερματικό.Καλό θα ήταν να δώσεις και το output του dmesg. Link to comment Share on other sites More sharing options...
deninho Σεπτέμβριος 25, 2013 Author #12 Κοινοποίηση Σεπτέμβριος 25, 2013 Δώσε $ speaker-test από τερματικό.αυτό υποτίθεται ότι παράγει ήχους από τα ηχεία; Καλό θα ήταν να δώσεις και το output του dmesg.[ 0.000000] Initializing cgroup subsys cpu[ 0.000000] Linux version 3.8.0-25-generic (buildd@allspice) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #37-Ubuntu SMP Thu Jun 6 20:47:30 UTC 2013 (Ubuntu 3.8.0-25.37-generic 3.8.13)[ 0.000000] KERNEL supported cpus:[ 0.000000] Intel GenuineIntel[ 0.000000] AMD AuthenticAMD[ 0.000000] NSC Geode by NSC[ 0.000000] Cyrix CyrixInstead[ 0.000000] Centaur CentaurHauls[ 0.000000] Transmeta GenuineTMx86[ 0.000000] Transmeta TransmetaCPU[ 0.000000] UMC UMC UMC UMC[ 0.000000] Disabled fast string operations[ 0.000000] e820: BIOS-provided physical RAM map:[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved[ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003fedffff] usable[ 0.000000] BIOS-e820: [mem 0x000000003fee0000-0x000000003fee9fff] ACPI data[ 0.000000] BIOS-e820: [mem 0x000000003feea000-0x000000003fefffff] ACPI NVS[ 0.000000] BIOS-e820: [mem 0x000000003ff00000-0x000000003fffffff] reserved[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000f0005fff] reserved[ 0.000000] BIOS-e820: [mem 0x00000000f0008000-0x00000000f000bfff] reserved[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed8ffff] reserved[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved[ 0.000000] NX (Execute Disable) protection: active[ 0.000000] SMBIOS 2.34 present.[ 0.000000] DMI: Sony Corporation VGN-FS115M, BIOS R0100J0 02/25/2005[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable[ 0.000000] e820: last_pfn = 0x3fee0 max_arch_pfn = 0x1000000[ 0.000000] MTRR default type: uncachable[ 0.000000] MTRR fixed ranges enabled:[ 0.000000] 00000-9FFFF write-back[ 0.000000] A0000-BFFFF uncachable[ 0.000000] C0000-CFFFF write-protect[ 0.000000] D0000-E3FFF uncachable[ 0.000000] E4000-FFFFF write-protect[ 0.000000] MTRR variable ranges enabled:[ 0.000000] 0 base 000000000 mask FC0000000 write-back[ 0.000000] 1 base 03FF00000 mask FFFF00000 uncachable[ 0.000000] 2 disabled[ 0.000000] 3 disabled[ 0.000000] 4 disabled[ 0.000000] 5 disabled[ 0.000000] 6 disabled[ 0.000000] 7 disabled[ 0.000000] PAT not supported by CPU.[ 0.000000] original variable MTRRs[ 0.000000] reg 0, base: 0GB, range: 1GB, type WB[ 0.000000] reg 1, base: 1023MB, range: 1MB, type UC[ 0.000000] total RAM covered: 1023M[ 0.000000] Found optimal setting for mtrr clean up[ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 2 lose cover RAM: 0G[ 0.000000] New variable MTRRs[ 0.000000] reg 0, base: 0GB, range: 1GB, type WB[ 0.000000] reg 1, base: 1023MB, range: 1MB, type UC[ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff][ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384[ 0.000000] init_memory_mapping: [mem 0x00000000-0x37bfdfff][ 0.000000] [mem 0x00000000-0x001fffff] page 4k[ 0.000000] [mem 0x00200000-0x379fffff] page 2M[ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k[ 0.000000] kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff][ 0.000000] RAMDISK: [mem 0x34530000-0x3628ffff][ 0.000000] ACPI: RSDP 000f7530 00014 (v00 PTLTD )[ 0.000000] ACPI: RSDT 3fee5a12 00044 (v01 Sony J0 20050225 PTL 00000000)[ 0.000000] ACPI: APIC 3fee9e78 00068 (v01 Sony J0 20050225 PTL 0000005F)[ 0.000000] ACPI: FACP 3fee9ee0 00084 (v02 Sony J0 20050225 PTL 0000005F)[ 0.000000] ACPI: DSDT 3fee64a7 039D1 (v01 Sony J0 20050225 PTL 20030224)[ 0.000000] ACPI: FACS 3fefafc0 00040[ 0.000000] ACPI: BOOT 3fee9fd8 00028 (v01 Sony J0 20050225 PTL 00000001)[ 0.000000] ACPI: MCFG 3fee9f9c 0003C (v01 Sony J0 20050225 PTL 0000005F)[ 0.000000] ACPI: SSDT 3fee62cf 001D4 (v01 Sony J0 20050225 PTL 20030224)[ 0.000000] ACPI: SSDT 3fee5e8a 00235 (v01 Sony J0 20050225 PTL 20030224)[ 0.000000] ACPI: SSDT 3fee5c6f 0021B (v01 Sony J0 20050225 PTL 20030224)[ 0.000000] ACPI: SSDT 3fee5a56 00219 (v01 Sony J0 20050225 PTL 20030224)[ 0.000000] ACPI: Local APIC address 0xfee00000[ 0.000000] 130MB HIGHMEM available.[ 0.000000] 891MB LOWMEM available.[ 0.000000] mapped low ram: 0 - 37bfe000[ 0.000000] low ram: 0 - 37bfe000[ 0.000000] Zone ranges:[ 0.000000] DMA [mem 0x00010000-0x00ffffff][ 0.000000] Normal [mem 0x01000000-0x37bfdfff][ 0.000000] HighMem [mem 0x37bfe000-0x3fedffff][ 0.000000] Movable zone start for each node[ 0.000000] Early memory node ranges[ 0.000000] node 0: [mem 0x00010000-0x0009efff][ 0.000000] node 0: [mem 0x00100000-0x3fedffff][ 0.000000] On node 0 totalpages: 261743[ 0.000000] free_area_init_node: node 0, pgdat c18f5dc0, node_mem_map f73fd200[ 0.000000] DMA zone: 32 pages used for memmap[ 0.000000] DMA zone: 0 pages reserved[ 0.000000] DMA zone: 3951 pages, LIFO batch:0[ 0.000000] Normal zone: 1752 pages used for memmap[ 0.000000] Normal zone: 222502 pages, LIFO batch:31[ 0.000000] HighMem zone: 262 pages used for memmap[ 0.000000] HighMem zone: 33244 pages, LIFO batch:7[ 0.000000] Using APIC driver default[ 0.000000] ACPI: PM-Timer IO Port: 0x1008[ 0.000000] ACPI: Local APIC address 0xfee00000[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)[ 0.000000] ACPI: IRQ0 used by override.[ 0.000000] ACPI: IRQ2 used by override.[ 0.000000] ACPI: IRQ9 used by override.[ 0.000000] Using ACPI (MADT) for SMP configuration information[ 0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs[ 0.000000] nr_irqs_gsi: 40[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000[ 0.000000] e820: [mem 0x40000000-0xdfffffff] available for PCI devices[ 0.000000] Booting paravirtualized kernel on bare hardware[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1[ 0.000000] PERCPU: Embedded 14 pages/cpu @f73da000 s35008 r0 d22336 u57344[ 0.000000] pcpu-alloc: s35008 r0 d22336 u57344 alloc=14*4096[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259697[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-25-generic root=UUID=5b95907f-5ad0-46ee-acdc-6aa3aaaeb45d ro quiet splash[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)[ 0.000000] __ex_table already sorted, skipping sort[ 0.000000] Initializing CPU#0[ 0.000000] allocated 2094720 bytes of page_cgroup[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups[ 0.000000] Initializing HighMem for node 0 (00037bfe:0003fee0)[ 0.000000] Memory: 994720k/1047424k available (6253k kernel code, 52252k reserved, 2970k data, 788k init, 134024k highmem)[ 0.000000] virtual kernel memory layout:[ 0.000000] fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)[ 0.000000] .init : 0xc1903000 - 0xc19c8000 ( 788 kB)[ 0.000000] .data : 0xc161b530 - 0xc1902100 (2970 kB)[ 0.000000] .text : 0xc1000000 - 0xc161b530 (6253 kB)[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1[ 0.000000] Hierarchical RCU implementation.[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.[ 0.000000] NR_IRQS:2304 nr_irqs:512 16[ 0.000000] CPU 0 irqstacks, hard=f6c08000 soft=f6c0a000[ 0.000000] Console: colour VGA+ 80x25[ 0.000000] console [tty0] enabled[ 0.000000] tsc: Fast TSC calibration using PIT[ 0.000000] tsc: Detected 1596.086 MHz processor[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.17 BogoMIPS (lpj=6384344)[ 0.004009] pid_max: default: 32768 minimum: 301[ 0.004056] Security Framework initialized[ 0.004075] AppArmor: AppArmor initialized[ 0.004078] Yama: becoming mindful.[ 0.004184] Mount-cache hash table entries: 512[ 0.004550] Initializing cgroup subsys cpuacct[ 0.004555] Initializing cgroup subsys memory[ 0.004570] Initializing cgroup subsys devices[ 0.004574] Initializing cgroup subsys freezer[ 0.004578] Initializing cgroup subsys blkio[ 0.004581] Initializing cgroup subsys perf_event[ 0.004586] Initializing cgroup subsys hugetlb[ 0.004628] Disabled fast string operations[ 0.004637] mce: CPU supports 5 MCE banks[ 0.004649] CPU0: Thermal monitoring enabled (TM2)[ 0.004663] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2[ 0.004663] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8[ 0.004663] tlb_flushall_shift: 6[ 0.022450] ACPI: Core revision 20121018[ 0.028042] ftrace: allocating 26121 entries in 52 pages[ 0.044143] Enabling APIC mode: Flat. Using 1 I/O APICs[ 0.044611] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1[ 0.086229] smpboot: CPU0: Intel(R) Pentium(R) M processor 1.60GHz (fam: 06, model: 0d, stepping: 08)[ 0.088000] Performance Events: p6 PMU driver.[ 0.088000] ... version: 0[ 0.088000] ... bit width: 32[ 0.088000] ... generic registers: 2[ 0.088000] ... value mask: 00000000ffffffff[ 0.088000] ... max period: 000000007fffffff[ 0.088000] ... fixed-purpose events: 0[ 0.088000] ... event mask: 0000000000000003[ 0.088000] Brought up 1 CPUs[ 0.088000] smpboot: Total of 1 processors activated (3192.17 BogoMIPS)[ 0.088000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.[ 0.088000] devtmpfs: initialized[ 0.088000] EVM: security.selinux[ 0.088000] EVM: security.SMACK64[ 0.088000] EVM: security.capability[ 0.088000] PM: Registering ACPI NVS region [mem 0x3feea000-0x3fefffff] (90112 bytes)[ 0.089459] regulator-dummy: no parameters[ 0.089555] NET: Registered protocol family 16[ 0.089768] EISA bus registered[ 0.089895] ACPI: bus type pci registered[ 0.089978] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)[ 0.089983] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820[ 0.089986] PCI: Using MMCONFIG for extended config space[ 0.089988] PCI: Using configuration type 1 for base access[ 0.091779] bio: create slab <bio-0> at 0[ 0.091938] ACPI: Added _OSI(Module Device)[ 0.091942] ACPI: Added _OSI(Processor Device)[ 0.091945] ACPI: Added _OSI(3.0 _SCP Extensions)[ 0.091948] ACPI: Added _OSI(Processor Aggregator Device)[ 0.093381] ACPI: EC: Look up EC in DSDT[ 0.196061] ACPI: Interpreter enabled[ 0.196075] ACPI: (supports S0 S3 S4 S5)[ 0.196101] ACPI: Using IOAPIC for interrupt routing[ 0.201545] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62[ 0.201687] ACPI: No dock devices found.[ 0.201694] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug[ 0.202133] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])[ 0.202138] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT][ 0.203218] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)[ 0.203223] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)[ 0.203227] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)[ 0.203232] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)[ 0.203236] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)[ 0.203240] pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)[ 0.203244] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xdfffffff] (ignored)[ 0.203248] PCI: root bus 00: using default resources[ 0.203289] PCI host bridge to bus 0000:00[ 0.203294] pci_bus 0000:00: root bus resource [bus 00-ff][ 0.203298] pci_bus 0000:00: root bus resource [io 0x0000-0xffff][ 0.203302] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff][ 0.203317] pci 0000:00:00.0: [8086:2590] type 00 class 0x060000[ 0.203383] pci 0000:00:01.0: [8086:2591] type 01 class 0x060400[ 0.203442] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold[ 0.203520] pci 0000:00:1b.0: [8086:2668] type 00 class 0x040300[ 0.203546] pci 0000:00:1b.0: reg 10: [mem 0x80000000-0x80003fff 64bit][ 0.203662] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold[ 0.203695] pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300[ 0.203758] pci 0000:00:1d.0: reg 20: [io 0x1800-0x181f][ 0.203807] pci 0000:00:1d.1: [8086:2659] type 00 class 0x0c0300[ 0.203871] pci 0000:00:1d.1: reg 20: [io 0x1820-0x183f][ 0.203920] pci 0000:00:1d.2: [8086:265a] type 00 class 0x0c0300[ 0.203983] pci 0000:00:1d.2: reg 20: [io 0x1840-0x185f][ 0.204040] pci 0000:00:1d.3: [8086:265b] type 00 class 0x0c0300[ 0.204104] pci 0000:00:1d.3: reg 20: [io 0x1860-0x187f][ 0.204166] pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320[ 0.204194] pci 0000:00:1d.7: reg 10: [mem 0x80004000-0x800043ff][ 0.204312] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold[ 0.204343] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401[ 0.204445] pci 0000:00:1f.0: [8086:2641] type 00 class 0x060100[ 0.204565] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000[ 0.204576] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO[ 0.204585] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO[ 0.204615] pci 0000:00:1f.1: [8086:266f] type 00 class 0x01018a[ 0.204635] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007][ 0.204649] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003][ 0.204664] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007][ 0.204679] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003][ 0.204694] pci 0000:00:1f.1: reg 20: [io 0x1880-0x188f][ 0.204749] pci 0000:00:1f.3: [8086:266a] type 00 class 0x0c0500[ 0.204829] pci 0000:00:1f.3: reg 20: [io 0x18a0-0x18bf][ 0.204934] pci 0000:01:00.0: [10de:0167] type 00 class 0x030000[ 0.204948] pci 0000:01:00.0: reg 10: [mem 0xa0000000-0xa0ffffff][ 0.204963] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref][ 0.204977] pci 0000:01:00.0: reg 1c: [mem 0x90000000-0x90ffffff 64bit][ 0.204994] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref][ 0.205045] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'[ 0.205055] pci 0000:00:01.0: PCI bridge to [bus 01][ 0.205062] pci 0000:00:01.0: bridge window [mem 0x90000000-0xafffffff][ 0.205067] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff pref][ 0.205132] pci 0000:06:03.0: [104c:ac8e] type 02 class 0x060700[ 0.205165] pci 0000:06:03.0: reg 10: [mem 0x00000000-0x00000fff][ 0.205220] pci 0000:06:03.0: supports D1 D2[ 0.205224] pci 0000:06:03.0: PME# supported from D0 D1 D2 D3hot D3cold[ 0.205263] pci 0000:06:03.2: [104c:802e] type 00 class 0x0c0010[ 0.205296] pci 0000:06:03.2: reg 10: [mem 0xb0004000-0xb00047ff][ 0.205315] pci 0000:06:03.2: reg 14: [mem 0xb0000000-0xb0003fff][ 0.205449] pci 0000:06:03.2: supports D1 D2[ 0.205452] pci 0000:06:03.2: PME# supported from D0 D1 D2 D3hot[ 0.205487] pci 0000:06:03.3: [104c:ac8f] type 00 class 0x018000[ 0.205520] pci 0000:06:03.3: reg 10: [mem 0xb0005000-0xb0005fff][ 0.205667] pci 0000:06:03.3: supports D1 D2[ 0.205671] pci 0000:06:03.3: PME# supported from D0 D1 D2 D3hot[ 0.205716] pci 0000:06:04.0: [8086:4220] type 00 class 0x028000[ 0.205749] pci 0000:06:04.0: reg 10: [mem 0xb0006000-0xb0006fff][ 0.205898] pci 0000:06:04.0: PME# supported from D0 D3hot D3cold[ 0.205941] pci 0000:06:08.0: [8086:1068] type 00 class 0x020000[ 0.205974] pci 0000:06:08.0: reg 10: [mem 0xb0007000-0xb0007fff][ 0.205993] pci 0000:06:08.0: reg 14: [io 0x2000-0x203f][ 0.206122] pci 0000:06:08.0: supports D1 D2[ 0.206125] pci 0000:06:08.0: PME# supported from D0 D1 D2 D3hot D3cold[ 0.206195] pci 0000:00:1e.0: PCI bridge to [bus 06-07] (subtractive decode)[ 0.206201] pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff][ 0.206208] pci 0000:00:1e.0: bridge window [mem 0xb0000000-0xb00fffff][ 0.206218] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)[ 0.206222] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)[ 0.206284] pci_bus 0000:07: busn_res: can not insert [bus 07-ff] under [bus 06-07] (conflicts with (null) [bus 06-07])[ 0.206292] pci_bus 0000:07: busn_res: [bus 07-ff] end is updated to 0a[ 0.206296] pci_bus 0000:07: busn_res: can not insert [bus 07-0a] under [bus 06-07] (conflicts with (null) [bus 06-07])[ 0.206304] pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:06 [bus 06-07][ 0.206321] pci_bus 0000:00: on NUMA node 0[ 0.206334] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT][ 0.206459] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT][ 0.206613] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM[ 0.206617] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)[ 0.207848] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11[ 0.207925] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 *4 5 6 7 11 12 14 15)[ 0.208009] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)[ 0.208084] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10[ 0.208159] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 *7 10 12 14 15)[ 0.208232] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.[ 0.208307] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.[ 0.208382] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)[ 0.208556] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none[ 0.208561] vgaarb: loaded[ 0.208563] vgaarb: bridge control possible 0000:01:00.0[ 0.208940] SCSI subsystem initialized[ 0.208944] ACPI: bus type scsi registered[ 0.208990] libata version 3.00 loaded.[ 0.209023] ACPI: bus type usb registered[ 0.209054] usbcore: registered new interface driver usbfs[ 0.209071] usbcore: registered new interface driver hub[ 0.209103] usbcore: registered new device driver usb[ 0.209258] PCI: Using ACPI for IRQ routing[ 0.220159] PCI: pci_cache_line_size set to 64 bytes[ 0.220248] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff][ 0.220251] e820: reserve RAM buffer [mem 0x3fee0000-0x3fffffff][ 0.220398] NetLabel: Initializing[ 0.220401] NetLabel: domain hash size = 128[ 0.220403] NetLabel: protocols = UNLABELED CIPSOv4[ 0.220422] NetLabel: unlabeled traffic allowed by default[ 0.220691] hpet clockevent registered[ 0.220697] HPET: 3 timers in total, 0 timers will be used for per-cpu timer[ 0.220705] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0[ 0.220711] hpet0: 3 comparators, 64-bit 14.318180 MHz counter[ 0.222761] Switching to clocksource hpet[ 0.232268] AppArmor: AppArmor Filesystem Enabled[ 0.232330] pnp: PnP ACPI init[ 0.232357] ACPI: bus type pnp registered[ 0.234204] pnp 00:00: [dma 4][ 0.234256] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)[ 0.234304] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)[ 0.234410] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)[ 0.234543] system 00:03: [io 0x0380-0x0383] has been reserved[ 0.234548] system 00:03: [io 0x0800-0x080f] has been reserved[ 0.234553] system 00:03: [io 0x1000-0x107f] has been reserved[ 0.234557] system 00:03: [io 0x1180-0x11bf] has been reserved[ 0.234562] system 00:03: [io 0x1640-0x164f] has been reserved[ 0.234567] system 00:03: [mem 0xf0008000-0xf000bfff] has been reserved[ 0.234572] system 00:03: [mem 0xf0000000-0xf0003fff] has been reserved[ 0.234577] system 00:03: [mem 0xf0005000-0xf0005fff] has been reserved[ 0.234581] system 00:03: [mem 0xf0004000-0xf0004fff] has been reserved[ 0.234586] system 00:03: [mem 0xe0000000-0xefffffff] has been reserved[ 0.234592] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)[ 0.234660] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)[ 0.234728] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)[ 0.234787] pnp 00:06: Plug and Play ACPI device, IDs SNY9001 PNP0f13 (active)[ 0.234818] pnp: PnP ACPI: found 7 devices[ 0.234820] ACPI: ACPI bus type pnp unregistered[ 0.234826] PnPBIOS: Disabled by ACPI PNP[ 0.271869] pci 0000:06:03.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000[ 0.271878] pci 0000:00:1e.0: bridge window [mem 0x04000000-0x03ffffff pref] to [bus 06-07] add_size 4000000[ 0.271887] pci 0000:00:1e.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000[ 0.271897] pci 0000:00:1e.0: BAR 15: assigned [mem 0x40000000-0x43ffffff pref][ 0.271903] pci 0000:01:00.0: BAR 6: assigned [mem 0x91000000-0x9101ffff pref][ 0.271909] pci 0000:00:01.0: PCI bridge to [bus 01][ 0.271915] pci 0000:00:01.0: bridge window [mem 0x90000000-0xafffffff][ 0.271920] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff pref][ 0.271931] pci 0000:06:03.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000[ 0.271935] pci 0000:06:03.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000[ 0.271940] pci 0000:06:03.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100[ 0.271944] pci 0000:06:03.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100[ 0.271950] pci 0000:06:03.0: BAR 0: assigned [mem 0x44000000-0x44000fff][ 0.271959] pci 0000:06:03.0: BAR 15: assigned [mem 0x40000000-0x43ffffff pref][ 0.271964] pci 0000:06:03.0: BAR 16: assigned [mem 0x48000000-0x4bffffff][ 0.271969] pci 0000:06:03.0: BAR 13: assigned [io 0x2400-0x24ff][ 0.271973] pci 0000:06:03.0: BAR 14: assigned [io 0x2800-0x28ff][ 0.271977] pci 0000:06:03.0: CardBus bridge to [bus 07-0a][ 0.271981] pci 0000:06:03.0: bridge window [io 0x2400-0x24ff][ 0.271990] pci 0000:06:03.0: bridge window [io 0x2800-0x28ff][ 0.272011] pci 0000:06:03.0: bridge window [mem 0x40000000-0x43ffffff pref][ 0.272020] pci 0000:06:03.0: bridge window [mem 0x48000000-0x4bffffff][ 0.272028] pci 0000:00:1e.0: PCI bridge to [bus 06-07][ 0.272033] pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff][ 0.272042] pci 0000:00:1e.0: bridge window [mem 0xb0000000-0xb00fffff][ 0.272049] pci 0000:00:1e.0: bridge window [mem 0x40000000-0x43ffffff pref][ 0.272085] pci 0000:00:1e.0: setting latency timer to 64[ 0.272096] pci 0000:06:03.0: enabling device (0000 -> 0003)[ 0.272111] pci_bus 0000:00: resource 4 [io 0x0000-0xffff][ 0.272115] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff][ 0.272119] pci_bus 0000:01: resource 1 [mem 0x90000000-0xafffffff][ 0.272123] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff pref][ 0.272127] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff][ 0.272131] pci_bus 0000:06: resource 1 [mem 0xb0000000-0xb00fffff][ 0.272135] pci_bus 0000:06: resource 2 [mem 0x40000000-0x43ffffff pref][ 0.272139] pci_bus 0000:06: resource 4 [io 0x0000-0xffff][ 0.272143] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff][ 0.272147] pci_bus 0000:07: resource 0 [io 0x2400-0x24ff][ 0.272150] pci_bus 0000:07: resource 1 [io 0x2800-0x28ff][ 0.272154] pci_bus 0000:07: resource 2 [mem 0x40000000-0x43ffffff pref][ 0.272158] pci_bus 0000:07: resource 3 [mem 0x48000000-0x4bffffff][ 0.272221] NET: Registered protocol family 2[ 0.272474] TCP established hash table entries: 8192 (order: 4, 65536 bytes)[ 0.272539] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)[ 0.272598] TCP: Hash tables configured (established 8192 bind 8192)[ 0.272642] TCP: reno registered[ 0.272647] UDP hash table entries: 512 (order: 2, 16384 bytes)[ 0.272666] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)[ 0.272765] NET: Registered protocol family 1[ 0.272975] pci 0000:01:00.0: Boot video device[ 0.273013] pci 0000:06:08.0: Firmware left e100 interrupts enabled; disabling[ 0.273019] PCI: CLS 64 bytes, default 64[ 0.273102] Trying to unpack rootfs image as initramfs...[ 1.207756] Freeing initrd memory: 30080k freed[ 1.233821] Simple Boot Flag at 0x36 set to 0x1[ 1.234205] Initialise module verification[ 1.234282] audit: initializing netlink socket (disabled)[ 1.234304] type=2000 audit(1380127291.232:1): initialized[ 1.266517] bounce pool size: 64 pages[ 1.266534] HugeTLB registered 2 MB page size, pre-allocated 0 pages[ 1.269105] VFS: Disk quotas dquot_6.5.2[ 1.269181] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)[ 1.270072] fuse init (API version 7.20)[ 1.270200] msgmni has been set to 1739[ 1.270660] Key type asymmetric registered[ 1.270663] Asymmetric key parser 'x509' registered[ 1.270722] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)[ 1.270759] io scheduler noop registered[ 1.270763] io scheduler deadline registered (default)[ 1.270772] io scheduler cfq registered[ 1.270982] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X[ 1.271081] pci_hotplug: PCI Hot Plug PCI Core version: 0.5[ 1.271109] pciehp: PCI Express Hot Plug Controller Driver version: 0.4[ 1.271224] intel_idle: does not run on family 6 model 13[ 1.272632] ACPI: AC Adapter [ADP1] (on-line)[ 1.272750] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0[ 1.273375] ACPI: Lid Switch [LID0][ 1.273435] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1[ 1.273442] ACPI: Power Button [PWRB][ 1.273514] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2[ 1.273519] ACPI: Power Button [PWRF][ 1.273632] ACPI: Requesting acpi_cpufreq[ 2.232079] tsc: Refined TSC clocksource calibration: 1596.156 MHz[ 2.232087] Switching to clocksource tsc[ 2.272110] tsc: Marking TSC unstable due to TSC halts in idle[ 2.272119] ACPI: acpi_idle registered with cpuidle[ 2.272335] Switching to clocksource hpet[ 2.278991] thermal LNXTHERM:00: registered as thermal_zone0[ 2.278995] ACPI: Thermal Zone [THRM] (39 C)[ 2.279071] GHES: HEST is not enabled![ 2.279214] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled[ 2.281683] isapnp: Scanning for PnP cards...[ 2.287331] ACPI: Battery Slot [BAT0] (battery present)[ 2.287447] Linux agpgart interface v0.103[ 2.289756] brd: module loaded[ 2.334516] loop: module loaded[ 2.334699] ata_piix 0000:00:1f.1: version 2.13[ 2.334768] ata_piix 0000:00:1f.1: setting latency timer to 64[ 2.335153] scsi0 : ata_piix[ 2.335718] scsi1 : ata_piix[ 2.335777] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14[ 2.335781] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15[ 2.336287] libphy: Fixed MDIO Bus: probed[ 2.336412] tun: Universal TUN/TAP device driver, 1.6[ 2.336414] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>[ 2.336495] PPP generic driver version 2.4.2[ 2.336552] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver[ 2.336556] ehci-pci: EHCI PCI platform driver[ 2.336596] ehci-pci 0000:00:1d.7: setting latency timer to 64[ 2.336602] ehci-pci 0000:00:1d.7: EHCI Host Controller[ 2.336611] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1[ 2.336631] ehci-pci 0000:00:1d.7: debug port 1[ 2.340543] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported[ 2.340711] ata2: port disabled--ignoring[ 2.340749] ehci-pci 0000:00:1d.7: irq 23, io mem 0x80004000[ 2.384387] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00[ 2.384449] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002[ 2.384453] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 2.384457] usb usb1: Product: EHCI Host Controller[ 2.384460] usb usb1: Manufacturer: Linux 3.8.0-25-generic ehci_hcd[ 2.384464] usb usb1: SerialNumber: 0000:00:1d.7[ 2.384613] hub 1-0:1.0: USB hub found[ 2.384621] hub 1-0:1.0: 8 ports detected[ 2.384857] ehci-platform: EHCI generic platform driver[ 2.384870] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver[ 2.384906] uhci_hcd: USB Universal Host Controller Interface driver[ 2.384933] uhci_hcd 0000:00:1d.0: setting latency timer to 64[ 2.384938] uhci_hcd 0000:00:1d.0: UHCI Host Controller[ 2.384946] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2[ 2.384978] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001800[ 2.385023] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001[ 2.385027] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 2.385031] usb usb2: Product: UHCI Host Controller[ 2.385034] usb usb2: Manufacturer: Linux 3.8.0-25-generic uhci_hcd[ 2.385038] usb usb2: SerialNumber: 0000:00:1d.0[ 2.385177] hub 2-0:1.0: USB hub found[ 2.385184] hub 2-0:1.0: 2 ports detected[ 2.385296] uhci_hcd 0000:00:1d.1: setting latency timer to 64[ 2.385301] uhci_hcd 0000:00:1d.1: UHCI Host Controller[ 2.385309] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3[ 2.385356] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820[ 2.385401] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001[ 2.385405] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 2.385409] usb usb3: Product: UHCI Host Controller[ 2.385412] usb usb3: Manufacturer: Linux 3.8.0-25-generic uhci_hcd[ 2.385416] usb usb3: SerialNumber: 0000:00:1d.1[ 2.385541] hub 3-0:1.0: USB hub found[ 2.385548] hub 3-0:1.0: 2 ports detected[ 2.385664] uhci_hcd 0000:00:1d.2: setting latency timer to 64[ 2.385669] uhci_hcd 0000:00:1d.2: UHCI Host Controller[ 2.385677] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4[ 2.385721] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840[ 2.385765] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001[ 2.385769] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 2.385773] usb usb4: Product: UHCI Host Controller[ 2.385776] usb usb4: Manufacturer: Linux 3.8.0-25-generic uhci_hcd[ 2.385780] usb usb4: SerialNumber: 0000:00:1d.2[ 2.385904] hub 4-0:1.0: USB hub found[ 2.385911] hub 4-0:1.0: 2 ports detected[ 2.386024] uhci_hcd 0000:00:1d.3: setting latency timer to 64[ 2.386029] uhci_hcd 0000:00:1d.3: UHCI Host Controller[ 2.386037] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5[ 2.386080] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860[ 2.386125] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001[ 2.386129] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 2.386133] usb usb5: Product: UHCI Host Controller[ 2.386136] usb usb5: Manufacturer: Linux 3.8.0-25-generic uhci_hcd[ 2.386140] usb usb5: SerialNumber: 0000:00:1d.3[ 2.386268] hub 5-0:1.0: USB hub found[ 2.386274] hub 5-0:1.0: 2 ports detected[ 2.386478] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12[ 2.390835] i8042: Detected active multiplexing controller, rev 1.1[ 2.437515] serio: i8042 KBD port at 0x60,0x64 irq 1[ 2.437524] serio: i8042 AUX0 port at 0x60,0x64 irq 12[ 2.437561] serio: i8042 AUX1 port at 0x60,0x64 irq 12[ 2.437598] serio: i8042 AUX2 port at 0x60,0x64 irq 12[ 2.437631] serio: i8042 AUX3 port at 0x60,0x64 irq 12[ 2.437780] mousedev: PS/2 mouse device common for all mice[ 2.437984] rtc_cmos 00:04: RTC can wake from S4[ 2.438148] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0[ 2.438183] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs[ 2.438335] device-mapper: uevent: version 1.0.3[ 2.438425] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel[MENTION=12892]red[/MENTION]hat.com[ 2.438451] EISA: Probing bus 0 at eisa.0[ 2.438461] Cannot allocate resource for EISA slot 1[ 2.438463] Cannot allocate resource for EISA slot 2[ 2.438499] EISA: Detected 0 cards.[ 2.438512] cpufreq-nforce2: No nForce2 chipset.[ 2.438541] cpuidle: using governor ladder[ 2.438576] cpuidle: using governor menu[ 2.438581] ledtrig-cpu: registered to indicate activity on CPUs[ 2.438584] EFI Variables Facility v0.08 2004-May-17[ 2.438822] ashmem: initialized[ 2.439004] TCP: cubic registered[ 2.439173] NET: Registered protocol family 10[ 2.439478] NET: Registered protocol family 17[ 2.439494] Key type dns_resolver registered[ 2.439687] Using IPI No-Shortcut mode[ 2.439798] Loading module verification certificates[ 2.446720] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: e20f7ab6198de3fe93af1d459153b337d0197de2'[ 2.446740] registered taskstats version 1[ 2.449951] Key type trusted registered[ 2.452641] Key type encrypted registered[ 2.455735] rtc_cmos 00:04: setting system clock to 2013-09-25 16:41:33 UTC (1380127293)[ 2.456037] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found[ 2.456039] EDD information not available.[ 2.674227] isapnp: No Plug & Play device found[ 2.677134] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3[ 2.848637] ata1.00: ATA-6: FUJITSU MHT2080AT, 0022, max UDMA/100[ 2.848642] ata1.00: 156301488 sectors, multi 16: LBA [ 2.848658] ata1.01: ATAPI: SONY DVD RW DW-D56A, PFS3, max UDMA/33[ 2.864542] ata1.00: configured for UDMA/100[ 2.880282] ata1.01: configured for UDMA/33[ 2.880778] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHT2080A 0022 PQ: 0 ANSI: 5[ 2.881010] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)[ 2.881092] sd 0:0:0:0: [sda] Write Protect is off[ 2.881097] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00[ 2.881132] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA[ 2.881544] sd 0:0:0:0: Attached scsi generic sg0 type 0[ 2.924041] usb 3-1: new low-speed USB device number 2 using uhci_hcd[ 2.982780] sda: sda1 sda2 < sda5 >[ 2.983090] scsi 0:0:1:0: CD-ROM SONY DVD RW DW-D56A PFS3 PQ: 0 ANSI: 5[ 2.984728] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray[ 2.984732] cdrom: Uniform CD-ROM driver Revision: 3.20[ 2.984858] sr 0:0:1:0: Attached scsi CD-ROM sr0[ 2.985015] sr 0:0:1:0: Attached scsi generic sg1 type 5[ 2.985331] sd 0:0:0:0: [sda] Attached SCSI disk[ 2.985404] Freeing unused kernel memory: 788k freed[ 2.985799] Write protecting the kernel text: 6256k[ 2.985879] Write protecting the kernel read-only data: 2432k[ 2.985881] NX-protecting the kernel data: 3984k[ 3.003958] udevd[98]: starting version 175[ 3.106417] usb 3-1: New USB device found, idVendor=045e, idProduct=007d[ 3.106425] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0[ 3.106429] usb 3-1: Product: Microsoft Notebook/Mobile Optical Mouse 2.0[ 3.106433] usb 3-1: Manufacturer: Microsoft[ 3.197087] Disabling lock debugging due to kernel taint[ 3.197657] ACPI: Video Device [NGFX] (multi-head: yes rom: no post: no)[ 3.197738] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/LNXVIDEO:00/input/input4[ 3.277038] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI[ 3.277044] e100: Copyright(c) 1999-2006 Intel Corporation[ 3.323726] e100 0000:06:08.0 eth0: addr 0xb0007000, irq 20, MAC addr 00:01:4a:1a:80:f2[ 3.417010] firewire_ohci 0000:06:03.2: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2[ 3.437700] usbcore: registered new interface driver usbhid[ 3.437704] usbhid: USB HID core driver[ 3.450175] input: Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0 as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input5[ 3.450459] hid-generic 0003:045E:007D.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0] on usb-0000:00:1d.1-1/input0[ 3.916147] firewire_core 0000:06:03.2: created device fw0: GUID 0800460301d35259, S400[ 4.694375] xor: automatically using best checksumming function:[ 4.732009] pIII_sse : 4216.000 MB/sec[ 4.743866] device-mapper: dm-raid45: initialized v0.2594b[ 4.812528] Btrfs loaded[ 4.972356] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)[ 26.659159] Adding 1046524k swap on /dev/sda5. Priority:-1 extents:1 across:1046524k [ 26.727733] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready[ 26.796948] udevd[425]: starting version 175[ 27.142733] lp: driver loaded but no devices found[ 27.167484] microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20[ 27.177219] intel_rng: FWH not detected[ 27.305351] ACPI Warning: 0x000011b0-0x000011bf SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)[ 27.305365] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver[ 27.305369] ACPI Warning: 0x00001180-0x000011af SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)[ 27.305374] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver[ 27.305377] lpc_ich: Resource conflict(s) found affecting gpio_ich[ 27.440866] device-mapper: multipath: version 1.5.1 loaded[ 27.501605] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro[ 27.655491] nvidia: module license 'NVIDIA' taints kernel.[ 27.744471] cfg80211: Calling CRDA to update world regulatory domain[ 27.764143] tifm_core: MMC/SD card detected in socket 0:0[ 27.781173] yenta_cardbus 0000:06:03.0: CardBus bridge found [104d:818f][ 27.781205] yenta_cardbus 0000:06:03.0: Enabling burst memory read transactions[ 27.781213] yenta_cardbus 0000:06:03.0: Using CSCINT to route CSC interrupts to PCI[ 27.781216] yenta_cardbus 0000:06:03.0: Routing CardBus interrupts to PCI[ 27.781225] yenta_cardbus 0000:06:03.0: TI: mfunc 0x01001b22, devctl 0x64[ 27.880866] lib80211: common routines for IEEE802.11 drivers[ 27.880873] lib80211_crypt: registered algorithm 'NULL'[ 28.025010] yenta_cardbus 0000:06:03.0: ISA IRQ mask 0x0cf8, PCI irq 16[ 28.025020] yenta_cardbus 0000:06:03.0: Socket status: 30000006[ 28.025026] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #07 to #0a[ 28.025038] yenta_cardbus 0000:06:03.0: pcmcia: parent PCI bridge window: [io 0x2000-0x2fff][ 28.025042] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff:[ 28.040133] sony_laptop: Sony Notebook Control Driver v0.6[ 28.043093] input: Sony Vaio Keys as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:15/SNY5001:00/input/input6[ 28.045461] input: Sony Vaio Jogdial as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:15/SNY5001:00/input/input7[ 28.047338] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem[ 28.061495] libipw: 802.11 data/management/control stack, git-1.1.13[ 28.061499] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>[ 28.034651] excluding 0x2000-0x203f 0x23b0-0x23df 0x2400-0x24ff 0x27b0-0x27df 0x2800-0x28ff 0x2bb0-0x2bdf[ 28.101394] NVRM: loading NVIDIA UNIX x86 Kernel Module 304.88 Wed Mar 27 14:31:12 PDT 2013[ 28.164440] input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input8[ 28.166120] snd_hda_intel 0000:00:1b.0: irq 41 for MSI/MSI-X[ 28.177870] 0x2fb0-0x2fdf[ 28.177926] yenta_cardbus 0000:06:03.0: pcmcia: parent PCI bridge window: [mem 0xb0000000-0xb00fffff][ 28.177933] pcmcia_socket pcmcia_socket0: cs: memory probe 0xb0000000-0xb00fffff:[ 28.177937] excluding 0xb0000000-0xb000ffff[ 28.177954] yenta_cardbus 0000:06:03.0: pcmcia: parent PCI bridge window: [mem 0x40000000-0x43ffffff pref][ 28.177959] pcmcia_socket pcmcia_socket0: cs: memory probe 0x40000000-0x43ffffff:[ 28.177975] excluding 0x40000000-0x43ffffff[ 28.237638] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input9[ 28.238176] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq[ 28.238179] ipw2200: Copyright(c) 2003-2006 Intel Corporation[ 28.256848] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection[ 28.328245] microcode: Microcode Update Driver: v2.00 <tigran[MENTION=13603]aiva[/MENTION]zian.fsnet.co.uk>, Peter Oruba[ 28.328826] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10[ 28.440048] init: failsafe main process (735) killed by TERM signal[ 28.469983] input: HDA Intel SPDIF In as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11[ 28.472300] input: HDA Intel SPDIF as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12[ 28.472593] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13[ 28.473068] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14[ 28.475702] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15[ 28.477832] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16[ 28.629645] ipw2200: Detected geography ZZD (13 802.11bg channels, 0 802.11a channels)[ 28.663408] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:[ 28.664815] excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377 0x380-0x387[ 28.665820] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:[ 28.666341] excluding 0x3f0-0x3f7 0x4d0-0x4d7[ 28.666825] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:[ 28.667653] clean.[ 28.667675] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:[ 28.668597] clean.[ 28.668625] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:[ 28.668630] excluding 0xc0000-0xc7fff 0xdc000-0xfffff[ 28.668665] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:[ 28.668683] excluding 0xa0000000-0xa0ffffff[ 28.668705] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:[ 28.668725] clean.[ 28.668745] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:[ 28.669664] clean.[ 28.867568] cfg80211: World regulatory domain updated:[ 28.867576] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)[ 28.867579] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)[ 28.867583] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)[ 28.867586] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)[ 28.867589] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)[ 28.867592] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)[ 28.911855] Bluetooth: Core ver 2.16[ 28.912626] NET: Registered protocol family 31[ 28.912630] Bluetooth: HCI device and connection manager initialized[ 28.912643] Bluetooth: HCI socket layer initialized[ 28.912647] Bluetooth: L2CAP socket layer initialized[ 28.912656] Bluetooth: SCO socket layer initialized[ 28.956128] Bluetooth: BNEP (Ethernet Emulation) ver 1.3[ 28.956135] Bluetooth: BNEP filters: protocol multicast[ 28.956148] Bluetooth: BNEP socket layer initialized[ 28.984038] Bluetooth: RFCOMM TTY layer initialized[ 28.984060] Bluetooth: RFCOMM socket layer initialized[ 28.984063] Bluetooth: RFCOMM ver 1.11[ 29.897866] init: avahi-cups-reload main process (847) terminated with status 1[ 29.947604] ppdev: user-space parallel port driver[ 30.241962] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready[ 30.242571] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready[ 30.948067] lib80211_crypt: registered algorithm 'CCMP'[ 32.724192] init: udev-fallback-graphics main process (928) terminated with status 1[ 35.933312] init: plymouth-stop pre-start process (1533) terminated with status 1[ 707.588257] ipw2200: Firmware error detected. Restarting.[ 4547.087233] ipw2200: Firmware error detected. Restarting.[ 0.000000] Initializing cgroup subsys cpuset Link to comment Share on other sites More sharing options...
ganastasiou Σεπτέμβριος 27, 2013 #13 Κοινοποίηση Σεπτέμβριος 27, 2013 Ναι το speaker-test παράγει ήχους στα ηχεία. Να φανταστώ δεν άκουσες κάτι σωστά;Χμμ εντύπωση μου κάνει αυτό:[ 28.328826] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10[B][ 28.440048] init: failsafe main process (735) killed by TERM signal[/B][ 28.469983] input: HDA Intel SPDIF In as /devices/pci0000:00/0000:00:1b.0/sound/card0/input1ίσως κάποιο bug στο module της κάρτας ήχου.Δοκίμασε να μπείς σε runlevel 1, και τρέξε πάλι speaker-test να δεις αν παράγει ήχο.ΥΓ. Για να μπείς σε runlevel 1, στο μενού του Grub στην αρχή, πατάς το e(edit) και προσθέτεις στο τέλος της γραμμής linux του πυρήνα σου το 1, και μετά πατάς F10 αν θυμάμαι καλά, αν και το γράφει στο κάτω μέρος για να bootarei.linux /vmlinuz-3.11.1-pf-testing root=/dev/sda5 ro quiet [B]1[/B]Μετά το runlevel 1, μπορείς να συνεχίσεις κανονικά στην εκκίνηση με το init 3.Πάντως δοκίμασε και κάποιο άλλο live μέσο, να δείς αν θα έχεις ήχο. Link to comment Share on other sites More sharing options...
trendy Οκτώβριος 1, 2013 #14 Κοινοποίηση Οκτώβριος 1, 2013 Καλύτερα να φτάσεις σε login screen, να πατήσεις Ctrl-Alt-F1 έως F6 (όποιο σε βγάλει πρώτο στην κονσόλα), να τρέξεις ένα "telinit 1" αντί να πειράζεις το boot loader. Αλλά και ένα live cd-usb πιστεύω θα λύσει τις απορίες μας.Δοκίμασε και τη λύσηhttp://www.linuxquestions.org/questions/linux-hardware-18/no-hdmi-audio-in-linux-819172/#post4032980βάζοντας μόνο:options snd-hda-intel probe_mask=0xfff2 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.